bind配置信息详细列表

系统管理员 2022-07-10 06:57 580阅读 0赞

This section defines in summary format all the statements available in BIND 9.3.0 (updated for some 9.6.x values) named.conf. This list is in alphabetic order to make it useful. Don't you just hate it when you spend 2 minutes looking for something that should take two seconds. The entries enclosed in square brackets following the statement, and where present, specify the clause or clauses in which the statement may be used.

additional-from-auth (yes | no) ; \[ Opt, View \] additional-from-cache (yes | no) ; \[ Opt, View \] algorithm "algorithm\_name"; \[ Key \] allow-notify \{ address\_match\_list \}; \[ Opt, View, Zone \] allow-query \{ address\_match\_list \}; \[ Opt, View, Zone \] allow-recursion \{ address\_match\_list \}; \[ Opt, View \] allow-transfer \{ address\_match\_list \}; \[ Opt, View, Zone \] allow-update \{ address\_match\_list \}; \[ Zone \] allow-update-forwarding \{ address\_match\_list \}; \[ Opt, View, Zone \] allow-v6-synthesis \{ address\_match\_list \}; Obsolete also-notify \{ ip\_addr \[port ip\_port\] ; ... \] \}; \[ Opt, View, Zone \] alt-transfer-source ( ipv4 | \* ) \[ port ( integer | \* )\]; \[ Opt, View, Zone \] alt-transfer-source-v6 ( ipv6 | \* ) \[ port ( integer | \* ) \]; \[ Opt, View, Zone \] auth-nxdomain (yes | no); \[ Opt, View \] avoid-v4-udp-ports \{ port; ... \}; \[ Opt \] avoid-v6-udp-ports \{ port; ... \}; \[ Opt \] blackhole \{ address\_match\_list \}; \[ Opt \] bogus ( yes | no ); \[ Server \] cache-file DEVELOPER ONLY STATEMENT category category\_name \{ channel\_name; ... \}; \[ logging \] channel channel\_name \{ channel\_spec \}; \[ logging \] check-names ( master | slave | response ) ( fail | warn | ignore ); \[ Opt, view \] check-names ( fail | warn | ignore ); \[ Zone \] cleaning-interval number; \[ Opt, View \] coresize size\_in\_bytes ; \[ Opt \] database "database-name params"; \[ Zone \] datasize size\_spec ; \[ Opt \] deallocate-on-exit yes\_or\_no; IGNORED - DEFAULT BEHAVIOUR IN BIND 9 delegation-only ( yes | no ) ; \[ Zone \] dialup dialup\_options; \[ Opt, View, Zone \] directory path\_name; \[ Opt \] disable-algorithms string \{ string; ... \}; \[ Opt, View \] dnssec-enable ( yes | no ); \[ Opt, View \] dnssec-lookaside domain trust-anchor domain; \[ Opt, View \] dnssec-must-be-secure domain ( yes | no); \[ Opt, View \] dual-stack-servers \[ port p\_num \] \{ ( "id" \[port p\_num\] | ipv4 \[port p\_num\] | ipv6 \[port p\_num\] ); ... \}; \[ Opt, View \] dump-file path\_name; \[ Opt \] edns ( yes | no); \[ server \] edns-udp-size size\_in\_bytes; \[ Opt, View \] fake-iquery yes\_or\_no; \] IGNORED IN BIND 9 fetch-glue yes\_or\_no; \] OBSOLETE IN BIND 9 file "file\_name" ; \[ Zone \] files number\_of\_files ; \[ Opt, View \] forward ( only | first ); \[ Opt, View, Zone \] forwarders \{ ipv4\_addr | ipv6\_addr \[port ip\_port\] ; ... \] \}; \[ Opt, View, Zone \] has-old-clients yes | no; IGNORED IN BIND 9 heartbeat-interval minutes; \[ Opt, View \] host-statistics yes\_or\_no; NOT YET IMPLEMENTED IN BIND 9 hostname hostname\_string; ; \[ Opt, View \] inet ( ip\_addr | \* ) \[ port ip\_port \] allow \{ address\_match\_list \} keys \{ key\_list \}; \[ controls \] interface-interval number; \[ Opt \] ixfr-from-differences ( yes | no); \[ Opt, View, Zone \] ixfr-tmp-file -- ; OBSOLETE IN BIND 9 key-directory path\_name; \[ Opt, View, Zone \] lame-ttl number; \[ Opt, View \] listen-on \[ port ip\_port \] \{ address\_match\_list \}; \[Opt, lwres \] listen-on-v6 \[ port ip\_port \] \{ address\_match\_list \}; \[ Opt \] maintain-ixfr-base ( yes | no ); OBSOLETE IN BIND 9 masters \[port ip\_port\] \{ ( masters\_list | ip\_addr \[port ip\_port\] \[key key\] ) ; \[...\] \} ; \] \[ Zone \] match-clients \{ address\_match\_list \} ; \[ View \] match-destination \{ address\_match\_list \} ; \[ View \] match-mapped-addresses ( yes | no ); \[ Opt \] match-recursive-only \{ address\_match\_list \} ; \[ View \] max-cache-size size\_in\_bytes ; \[ Opt, View \] max-cache-ttl seconds; \[ Opt, View \] max-ixfr-log-size number; OBSOLETE IN BIND 9 max-journal-size size\_in\_bytes; \[ Opt, View, Zone \] max-ncache-ttl seconds; \[ Opt, View \] max-refresh-time seconds ; \[ Opt, View, Zone \] max-retry-time seconds ; \[ Opt, View, Zone \] max-transfer-idle-in minutes; \[ Opt, View, Zone \] max-transfer-idle-out minutes; \[ Opt, View, Zone \] max-transfer-time-in minutes; \[ Opt, View, Zone \] max-transfer-time-out minutes; \[ Opt, View, Zone \] memstatistics-file "path\_name"; \[ Opt \] min-refresh-time seconds ; \[ Opt, View, Zone \] min-retry-time seconds ; \[ Opt, View, Zone \] min-roots number; NOT YET IMPLEMENTED IN BIND 9 minimal-responses ( yes | no ) ; \[ Opt, View \] multi-master ( yes | no ) ; \[ Opt, View, Zone \] multiple-cnames (yes | no); IGNORED BY BIND 9 named-xfer path\_name; OBSOLETE IN BIND 9 ndots number ; \[ lwres \] notify ( yes | no | explicit ); \[ Opt, View, Zone \] notify-source (ip4\_addr | \*) \[port ip\_port\] ; \[ Opt, View, Zone \] notify-source-v6 (ip6\_addr | \*) \[port ip\_port\] ; \[ Opt, View, Zone \] pid-file "path\_to\_file"; \[ Opt \] port ip\_port; \[ Opt \] preferred-glue ( A | AAAA) ; \[ Opt, View \] provide-ixfr ( yes | no) ; \[ Opt, View, server \] pubkey ; OBSOLETE IN BIND 9 query-source \[ address ( ip\_addr | \* ) \] \[ port ( ip\_port | \* ) \]; \[ Opt, View \] query-source-v6 \[ address ( ip\_addr | \* ) \] \[ port ( ip\_port | \* ) \]; \[ Opt, View \] querylog ( yes | no ); \[ Opt \] recursing-file "path\_to\_file"; \[ Opt \] random-device "device\_name" ; \[ Opt \] recursion ( yes | no ); \[ Opt, View \] recursive-clients number; \[ Opt \] request-ixfr ( yes | no ); \[ Opt, View, server \] rfc2308-type1 ( yes | no ); NOT YET IMPLEMENTED IN BIND 9 root-delegation-only \[ exclude \{ namelist \} \] ; \[ Opt, View \] rrset-order \{ order\_spec ; \[ order\_spec ; ... \] ); \[ Opt, View \] search \{ domain\_name ; \[ domain\_name ; ... \] \}; \[ lwres \] secret secret\_string ; \[ key \] serial-queries number; NOT IMPLEMENTED IN BIND 9 serial-query-rate number; \[ Opt \] sig-validity-interval number ; \[ Opt, View, Zone \] server-id "server\_id"; \[ Opt \] sortlist \{ address\_match\_list \}; \[ Opt, View \] stacksize size\_in\_bytes ; \[ Opt \] statistics-file path\_name; \[ Opt \] statistics-interval number; NOT YET IMPLEMENTED IN BIND9 support-ixfr; OBSOLETE IN BIND9 suppress-initial-notify NOT YET IMPLEMENTED IN BIND9 sig-validity-interval days ; \[ Opt, View, Zone \] tcp-clients number; \[ Opt \] tcp-listen-queue number; \[ Opt \] tkey-dhkey key\_name key\_tag; \[ Opt \] tkey-domain domainname; \[ Opt \] tkey-gssapi-credential domainname; \[ Opt \] topology \{ address\_match\_list \}; NOT YET IMPLEMENTED IN BIND 9 transfer-format ( one-answer | many-answers ); \[ Opt, View, server \] transfer-source (ip4\_addr | \*) \[port ip\_port\] ; \[ Opt, View, Zone \] transfer-source-v6 (ip6\_addr | \*) \[port ip\_port\] ; \[ Opt, View, Zone \] transfers number ; \[ server \] transfers-in number; \[ Opt \] transfers-out number; \[ Opt \] transfers-per-ns number; \[ Opt \] treat-cr-as-space yes\_or\_no ; OBSOLETE BIND 9 READS BOTH FORMATS type zone\_type; \[ Zone \] unix ; NOT YET IMPLEMENTED IN BIND 9 update-policy \{ update\_policy\_rule \[...\] \}; \[ Zone \] use-alt-transfer-source ( yes | no ); \[ Opt, View, Zone \] use-v4-udp-ports \[range begin end;\] use-v6-udp-ports \[range begin end;\] use-id-pool ( yes | no ); OBSOLETE IIN BIND 9 use-ixfr ( yes | no ) ; OBSOLETE IN BIND 9 view view\_name ; \[ lwres \] version version\_string; \[ Opt \] zone-statistics ( yes | no ) ; \[ Opt, View, Zone \]