needle之 Quick Start Guide

￡神魔★判官ぃ 2022-07-08 17:54 183阅读 0赞

先说下，我的环境：

操作系统：Mac OS X EI Caption ，版本号：10.11.6

python版本：2.7.13

Mob SF

1、启动needle

打开终端， 找到 needle所在目录，键入命令： python needle.py

![Center][]

当然， 你可以使用命令： show options 查看到当前的一些配置：

Name          Current Value         Required   Description
    ------------  -------------         --------   -----------
    APP                                 no        Bundle ID of the target application (e.g., com.example.app). Leave empty to launch wizard
    DEBUG         False                 yes       Enable debugging output
    IP            127.0.0.1             yes       IP address of the testing device (set to localhost to use USB)
    OUTPUT_FOLDER /root/.needle/output  yes       Full path of the output folder, where to store the output of the modules
    PASSWORD      alpine                yes       SSH Password of the testing device
    PORT          2222                  yes       Port of the SSH agent on the testing device (needs to be != 22 to use USB)
    PUB_KEY_AUTH  True                  yes       Use public key auth to authenticate to the device. Key must be present in the ssh-agent if a 
    SAVE_HISTORY  True                  yes       Persists command history across sessions
    SETUP_DEVICE  True                  yes       Set to true to enable auto-configuration of the device (installation of all the tools needed)
    USERNAME      root                  yes       SSH Username of the testing device
    VERBOSE       True                  yes       Enable verbose output

![Center 1][]

可以看到一些常见属性， IP， 端口， bundle ID。

我们也可以自己建立好一个配置文件， 名为 ： config.txt, 内容填写格式如下：

$ cat config.txt
    # This is a comment, it won't be executed
    set DEBUG False
    set VERBOSE False
    
    # If SETUP_DEVICE is set to True, 
    # Needle will automatically install all the required tools on the device
    set SETUP_DEVICE False
    
    set IP 192.168.0.10
    set PORT 5555
    set APP com.example.app
    use binary/info/metadata

然后，放到 needle.py 所在目录， 重新打开终端名， 启动 needle . 命令：

python needle.py -r config.txt

[Center]: /images/20220708/cb38647324c44adb8ad9b6ddc824dfe6.png
[Center 1]: /images/20220708/77681ee807d94ecfa2b4426338761e5d.png