MSP430(G2553)用看门狗定时器来产生周期信号

亦凉 2022-05-28 03:12 177阅读 0赞

#include <msp430g2553.h>
    #include <intrinsics.h>
    
    
    volatile unsigned int i = 0;  // 中断服务子程序中所用到的全局变量, 最好定义成 volatile 型, 具体原因和用法可以参考我的其他博文介绍
    
    void main (void)
    {
        WDTCTL = WDT_MDLY_0_5; // 周期 0.5ms, 设置可参考下面头文件中的截段
        IE1 |= WDTIE;          // 使能WDT中断
        P2DIR |= BIT2;         // P2.2输出
        _EINT();               // 使能全局中断
        for (;;)
        {
            LPM0;              // 进入LPM0
            _NOP();
        }
    }
    
    
    // 看门狗中断服务子程序
    #pragma vector=WDT_VECTOR
    __interrupt void WDT_Timer_ISR(void)
    {
        if (i++ > 1) {
            P2OUT ^= BIT2;     // 取反
        }
    }

==============================================================================================================================

//==========================================================================================================================
    // 相关头文件中的定义
    /************************************************************
    * WATCHDOG TIMER
    ************************************************************/
    #define __MSP430_HAS_WDT__             /* Definition to show that Module is available */
    
    #define WDTCTL_             (0x0120u)  /* Watchdog Timer Control */
    DEFW(   WDTCTL            , WDTCTL_)
    /* The bit names have been prefixed with "WDT" */
    #define WDTIS0              (0x0001u)
    #define WDTIS1              (0x0002u)
    #define WDTSSEL             (0x0004u)
    #define WDTCNTCL            (0x0008u)
    #define WDTTMSEL            (0x0010u)
    #define WDTNMI              (0x0020u)
    #define WDTNMIES            (0x0040u)
    #define WDTHOLD             (0x0080u)
    #define WDTPW               (0x5A00u)
    
    
    /* WDT-interval times [1ms] coded with Bits 0-2 */
    /* WDT is clocked by fSMCLK (assumed 1MHz) */
    #define WDT_MDLY_32         (WDTPW+WDTTMSEL+WDTCNTCL)                         /* 32ms interval (default) */
    #define WDT_MDLY_8          (WDTPW+WDTTMSEL+WDTCNTCL+WDTIS0)                  /* 8ms     " */
    #define WDT_MDLY_0_5        (WDTPW+WDTTMSEL+WDTCNTCL+WDTIS1)                  /* 0.5ms   " */
    #define WDT_MDLY_0_064      (WDTPW+WDTTMSEL+WDTCNTCL+WDTIS1+WDTIS0)           /* 0.064ms " */
    /* WDT is clocked by fACLK (assumed 32KHz) */
    #define WDT_ADLY_1000       (WDTPW+WDTTMSEL+WDTCNTCL+WDTSSEL)                 /* 1000ms  " */
    #define WDT_ADLY_250        (WDTPW+WDTTMSEL+WDTCNTCL+WDTSSEL+WDTIS0)          /* 250ms   " */
    #define WDT_ADLY_16         (WDTPW+WDTTMSEL+WDTCNTCL+WDTSSEL+WDTIS1)          /* 16ms    " */
    #define WDT_ADLY_1_9        (WDTPW+WDTTMSEL+WDTCNTCL+WDTSSEL+WDTIS1+WDTIS0)   /* 1.9ms   " */
    /* Watchdog mode -> reset after expired time */
    /* WDT is clocked by fSMCLK (assumed 1MHz) */
    #define WDT_MRST_32         (WDTPW+WDTCNTCL)                                  /* 32ms interval (default) */
    #define WDT_MRST_8          (WDTPW+WDTCNTCL+WDTIS0)                           /* 8ms     " */
    #define WDT_MRST_0_5        (WDTPW+WDTCNTCL+WDTIS1)                           /* 0.5ms   " */
    #define WDT_MRST_0_064      (WDTPW+WDTCNTCL+WDTIS1+WDTIS0)                    /* 0.064ms " */
    /* WDT is clocked by fACLK (assumed 32KHz) */
    #define WDT_ARST_1000       (WDTPW+WDTCNTCL+WDTSSEL)                          /* 1000ms  " */
    #define WDT_ARST_250        (WDTPW+WDTCNTCL+WDTSSEL+WDTIS0)                   /* 250ms   " */
    #define WDT_ARST_16         (WDTPW+WDTCNTCL+WDTSSEL+WDTIS1)                   /* 16ms    " */
    #define WDT_ARST_1_9        (WDTPW+WDTCNTCL+WDTSSEL+WDTIS1+WDTIS0)            /* 1.9ms   " */