SpringBoot属性文件配置参考手册

淩亂°似流年 2022-05-13 06:20 287阅读 0赞

--------------------

*   *  
 *  一、SpringBoot属性文件配置属性
    
     *  spring config
     *  profiles
     *  application settings
     *  logging
     *  identity
     *  server configuration
     *  spring mvc
     *  spring resources handling
     *  spring hateoas
     *  http encoding
     *  http message conversion
     *  http response compresssion
     *  jackson
     *  thymeleaf
     *  freemarker
     *  groovy templates
     *  velocity templates
     *  jersey
     *  internationalization
     *  security
     *  datasource
     *  dao
     *  mongodb
     *  jpa
     *  jta
     *  atomikos
     *  bitronix
     *  solr
     *  elasticsearch
     *  data reset
     *  flyway
     *  liquibase
     *  jmx
     *  pabbit
     *  redis
     *  activemq
     *  hornetQ
     *  jms
     *  email
     *  apring batch
     *  aop
     *  file encoding
     *  spring social
     *  spring social facebook
     *  spring social linkedin
     *  spring social twitter
     *  spring mobile site preference
     *  spring mobile device views
     *  management http server
     *  pid file
     *  endpoints
     *  health indicators
     *  mvc only endpoint
     *  jmx endpoint
     *  jolokia
     *  remote shell
     *  git info
     *  devtools（转自网友）
 *  二、SpringBoot MyBatis属性参考

##  ##

# 一、SpringBoot属性文件配置属性 #

以下为SpringBoot application.properties或者application.yml属性文件配置参考手册，每个配置部分都有目录，选择目录可以快速找到需要的配置内容，devtools属性配置之前为官网手册，内容为英文；devtools转自网友，内容为中文翻译。如需查看官网文件，请点击：[官网文档地址][Link 1]

## spring config ##

# SPRING CONFIG (ConfigFileApplicationListener)
    spring.config.name= # config file name (default to 'application')
    spring.config.location= # location of config file

## profiles ##

# PROFILES
    spring.profiles.active= # comma list of active profiles
    spring.profiles.include= # unconditionally activate the specified comma separated profiles

## application settings ##

# APPLICATION SETTINGS (SpringApplication)
    spring.main.sources=
    spring.main.web-environment= # detect by default
    spring.main.show-banner=true
    spring.main....= # see class for all properties

## logging ##

# LOGGING
    logging.path=/var/logs
    logging.file=myapp.log
    logging.config= # location of config file (default classpath:logback.xml for logback)
    logging.level.*= # levels for loggers, e.g. "logging.level.org.springframework=DEBUG" (TRACE, DEBUG, INFO, WARN, ERROR, FATAL, OFF)

## identity ##

# IDENTITY (ContextIdApplicationContextInitializer)
    spring.application.name=
    spring.application.index=

## server configuration ##

# EMBEDDED SERVER CONFIGURATION (ServerProperties)
    server.port=8080
    server.address= # bind to a specific NIC
    server.session-timeout= # session timeout in seconds
    server.context-parameters.*= # Servlet context init parameters, e.g. server.context-parameters.a=alpha
    server.context-path= # the context path, defaults to '/'
    server.servlet-path= # the servlet path, defaults to '/'
    server.ssl.enabled=true # if SSL support is enabled
    server.ssl.client-auth= # want or need
    server.ssl.key-alias=
    server.ssl.ciphers= # supported SSL ciphers
    server.ssl.key-password=
    server.ssl.key-store=
    server.ssl.key-store-password=
    server.ssl.key-store-provider=
    server.ssl.key-store-type=
    server.ssl.protocol=TLS
    server.ssl.trust-store=
    server.ssl.trust-store-password=
    server.ssl.trust-store-provider=
    server.ssl.trust-store-type=
    server.tomcat.access-log-pattern= # log pattern of the access log
    server.tomcat.access-log-enabled=false # is access logging enabled
    server.tomcat.compression=off # is compression enabled (off, on, or an integer content length limit)
    server.tomcat.compressableMimeTypes=text/html,text/xml,text/plain # comma-separated list of mime types that Tomcat will compress
    server.tomcat.internal-proxies=10\\.\\d{
       1,3}\\.\\d{
       1,3}\\.\\d{
       1,3}|\\
            192\\.168\\.\\d{
       1,3}\\.\\d{
       1,3}|\\
            169\\.254\\.\\d{
       1,3}\\.\\d{
       1,3}|\\
            127\\.\\d{
       1,3}\\.\\d{
       1,3}\\.\\d{
       1,3} # regular expression matching trusted IP addresses
    server.tomcat.protocol-header=x-forwarded-proto # front end proxy forward header
    server.tomcat.port-header= # front end proxy port header
    server.tomcat.remote-ip-header=x-forwarded-for
    server.tomcat.basedir=/tmp # base dir (usually not needed, defaults to tmp)
    server.tomcat.background-processor-delay=30; # in seconds
    server.tomcat.max-http-header-size= # maximum size in bytes of the HTTP message header
    server.tomcat.max-threads = 0 # number of threads in protocol handler
    server.tomcat.uri-encoding = UTF-8 # character encoding to use for URL decoding

## spring mvc ##

# SPRING MVC (WebMvcProperties)
    spring.mvc.locale= # set fixed locale, e.g. en_UK
    spring.mvc.date-format= # set fixed date format, e.g. dd/MM/yyyy
    spring.mvc.favicon.enabled=true
    spring.mvc.message-codes-resolver-format= # PREFIX_ERROR_CODE / POSTFIX_ERROR_CODE
    spring.mvc.ignore-default-model-on-redirect=true # If the the content of the "default" model should be ignored redirects
    spring.view.prefix= # MVC view prefix or spring.mvc.prefix
    spring.view.suffix= # ... and suffix or spring.mvc.suffix

## spring resources handling ##

# SPRING RESOURCES HANDLING (ResourceProperties)
    spring.resources.cache-period= # cache timeouts in headers sent to browser
    spring.resources.add-mappings=true # if default mappings should be added

## spring hateoas ##

# SPRING HATEOAS (HateoasProperties)
    spring.hateoas.apply-to-primary-object-mapper=true # if the primary mapper should also be configured

## http encoding ##

# HTTP encoding (HttpEncodingProperties)
    spring.http.encoding.charset=UTF-8 # the encoding of HTTP requests/responses
    spring.http.encoding.enabled=true # enable http encoding support
    spring.http.encoding.force=true # force the configured encoding

## http message conversion ##

# HTTP message conversion
    spring.http.converters.preferred-json-mapper= # the preferred JSON mapper to use for HTTP message conversion. Set to "gson" to force the use of Gson when both it and Jackson are on the classpath.

## http response compresssion ##

# HTTP response compression (GzipFilterProperties)
    spring.http.gzip.bufferSize= # size of the output buffer in bytes
    spring.http.gzip.minGzipSize= # minimum content length required for compression to occur
    spring.http.gzip.deflateCompressionLevel= # the level used for deflate compression (0-9)
    spring.http.gzip.deflateNoWrap= # noWrap setting for deflate compression (true or false)
    spring.http.gzip.methods= # comma-separated list of HTTP methods for which compression is enabled
    spring.http.gzip.mimeTypes= # comma-separated list of MIME types which should be compressed
    spring.http.gzip.excludedAgents= # comma-separated list of user agents to exclude from compression
    spring.http.gzip.excludedAgentPatterns= # comma-separated list of regular expression patterns to control user agents excluded from compression
    spring.http.gzip.excludedPaths= # comma-separated list of paths to exclude from compression
    spring.http.gzip.excludedPathPatterns= # comma-separated list of regular expression patterns to control the paths that are excluded from compression
    spring.http.gzip.vary= # Vary header to be sent on responses that may be compressed

## jackson ##

# JACKSON (JacksonProperties)
    spring.jackson.date-format= # Date format string (e.g. yyyy-MM-dd HH:mm:ss), or a fully-qualified date format class name (e.g. com.fasterxml.jackson.databind.util.ISO8601DateFormat)
    spring.jackson.property-naming-strategy= # One of the constants on Jackson's PropertyNamingStrategy (e.g. CAMEL_CASE_TO_LOWER_CASE_WITH_UNDERSCORES) or the fully-qualified class name of a PropertyNamingStrategy subclass
    spring.jackson.deserialization.*= # see Jackson's DeserializationFeature
    spring.jackson.generator.*= # see Jackson's JsonGenerator.Feature
    spring.jackson.mapper.*= # see Jackson's MapperFeature
    spring.jackson.parser.*= # see Jackson's JsonParser.Feature
    spring.jackson.serialization.*= # see Jackson's SerializationFeature

## thymeleaf ##

# THYMELEAF (ThymeleafAutoConfiguration)
    spring.thymeleaf.check-template-location=true
    spring.thymeleaf.prefix=classpath:/templates/
    spring.thymeleaf.excluded-view-names= # comma-separated list of view names that should be excluded from resolution
    spring.thymeleaf.view-names= # comma-separated list of view names that can be resolved
    spring.thymeleaf.suffix=.html
    spring.thymeleaf.mode=HTML5
    spring.thymeleaf.encoding=UTF-8
    spring.thymeleaf.content-type=text/html # ;charset=<encoding> is added
    spring.thymeleaf.cache=true # set to false for hot refresh

## freemarker ##

# FREEMARKER (FreeMarkerAutoConfiguration)
    spring.freemarker.allow-request-override=false
    spring.freemarker.cache=true
    spring.freemarker.check-template-location=true
    spring.freemarker.charset=UTF-8
    spring.freemarker.content-type=text/html
    spring.freemarker.expose-request-attributes=false
    spring.freemarker.expose-session-attributes=false
    spring.freemarker.expose-spring-macro-helpers=false
    spring.freemarker.prefix=
    spring.freemarker.request-context-attribute=
    spring.freemarker.settings.*=
    spring.freemarker.suffix=.ftl
    spring.freemarker.template-loader-path=classpath:/templates/ # comma-separated list
    spring.freemarker.view-names= # whitelist of view names that can be resolved

## groovy templates ##

# GROOVY TEMPLATES (GroovyTemplateAutoConfiguration)
    spring.groovy.template.cache=true
    spring.groovy.template.charset=UTF-8
    spring.groovy.template.configuration.*= # See Groovy's TemplateConfiguration
    spring.groovy.template.content-type=text/html
    spring.groovy.template.prefix=classpath:/templates/
    spring.groovy.template.suffix=.tpl
    spring.groovy.template.view-names= # whitelist of view names that can be resolved

## velocity templates ##

# VELOCITY TEMPLATES (VelocityAutoConfiguration)
    spring.velocity.allow-request-override=false
    spring.velocity.cache=true
    spring.velocity.check-template-location=true
    spring.velocity.charset=UTF-8
    spring.velocity.content-type=text/html
    spring.velocity.date-tool-attribute=
    spring.velocity.expose-request-attributes=false
    spring.velocity.expose-session-attributes=false
    spring.velocity.expose-spring-macro-helpers=false
    spring.velocity.number-tool-attribute=
    spring.velocity.prefer-file-system-access=true # prefer file system access for template loading
    spring.velocity.prefix=
    spring.velocity.properties.*=
    spring.velocity.request-context-attribute=
    spring.velocity.resource-loader-path=classpath:/templates/
    spring.velocity.suffix=.vm
    spring.velocity.toolbox-config-location= # velocity Toolbox config location, for example "/WEB-INF/toolbox.xml"
    spring.velocity.view-names= # whitelist of view names that can be resolved

## jersey ##

# JERSEY (JerseyProperties)
    spring.jersey.type=servlet # servlet or filter
    spring.jersey.init= # init params
    spring.jersey.filter.order=

## internationalization ##

# INTERNATIONALIZATION (MessageSourceAutoConfiguration)
    spring.messages.basename=messages
    spring.messages.cache-seconds=-1
    spring.messages.encoding=UTF-8

## security ##

# SECURITY (SecurityProperties)
    security.user.name=user # login username
    security.user.password= # login password
    security.user.role=USER # role assigned to the user
    security.require-ssl=false # advanced settings ...
    security.enable-csrf=false
    security.basic.enabled=true
    security.basic.realm=Spring
    security.basic.path= # /**
    security.basic.authorize-mode= # ROLE, AUTHENTICATED, NONE
    security.filter-order=0
    security.headers.xss=false
    security.headers.cache=false
    security.headers.frame=false
    security.headers.content-type=false
    security.headers.hsts=all # none / domain / all
    security.sessions=stateless # always / never / if_required / stateless
    security.ignored= # Comma-separated list of paths to exclude from the default secured paths

## datasource ##

# DATASOURCE (DataSourceAutoConfiguration & DataSourceProperties)
    spring.datasource.name= # name of the data source
    spring.datasource.initialize=true # populate using data.sql
    spring.datasource.schema= # a schema (DDL) script resource reference
    spring.datasource.data= # a data (DML) script resource reference
    spring.datasource.sql-script-encoding= # a charset for reading SQL scripts
    spring.datasource.platform= # the platform to use in the schema resource (schema-${platform}.sql)
    spring.datasource.continue-on-error=false # continue even if can't be initialized
    spring.datasource.separator=; # statement separator in SQL initialization scripts
    spring.datasource.driver-class-name= # JDBC Settings...
    spring.datasource.url=
    spring.datasource.username=
    spring.datasource.password=
    spring.datasource.jndi-name= # For JNDI lookup (class, url, username & password are ignored when set)
    spring.datasource.max-active=100 # Advanced configuration...
    spring.datasource.max-idle=8
    spring.datasource.min-idle=8
    spring.datasource.initial-size=10
    spring.datasource.validation-query=
    spring.datasource.test-on-borrow=false
    spring.datasource.test-on-return=false
    spring.datasource.test-while-idle=
    spring.datasource.time-between-eviction-runs-millis=
    spring.datasource.min-evictable-idle-time-millis=
    spring.datasource.max-wait=
    spring.datasource.jmx-enabled=false # Export JMX MBeans (if supported)

## dao ##

# DAO (PersistenceExceptionTranslationAutoConfiguration)
    spring.dao.exceptiontranslation.enabled=true

## mongodb ##

# MONGODB (MongoProperties)
    spring.data.mongodb.host= # the db host
    spring.data.mongodb.port=27017 # the connection port (defaults to 27107)
    spring.data.mongodb.uri=mongodb://localhost/test # connection URL
    spring.data.mongodb.database=
    spring.data.mongodb.authentication-database=
    spring.data.mongodb.grid-fs-database=
    spring.data.mongodb.username=
    spring.data.mongodb.password=
    spring.data.mongodb.repositories.enabled=true # if spring data repository support is enabled

## jpa ##

# JPA (JpaBaseConfiguration, HibernateJpaAutoConfiguration)
    spring.jpa.properties.*= # properties to set on the JPA connection
    spring.jpa.open-in-view=true
    spring.jpa.show-sql=true
    spring.jpa.database-platform=
    spring.jpa.database=
    spring.jpa.generate-ddl=false # ignored by Hibernate, might be useful for other vendors
    spring.jpa.hibernate.naming-strategy= # naming classname
    spring.jpa.hibernate.ddl-auto= # defaults to create-drop for embedded dbs
    spring.data.jpa.repositories.enabled=true # if spring data repository support is enabled

## jta ##

# JTA (JtaAutoConfiguration)
    spring.jta.log-dir= # transaction log dir
    spring.jta.*= # technology specific configuration

## atomikos ##

# ATOMIKOS
    spring.jta.atomikos.connectionfactory.borrow-connection-timeout=30 # Timeout, in seconds, for borrowing connections from the pool
    spring.jta.atomikos.connectionfactory.ignore-session-transacted-flag=true # Whether or not to ignore the transacted flag when creating session
    spring.jta.atomikos.connectionfactory.local-transaction-mode=false # Whether or not local transactions are desired
    spring.jta.atomikos.connectionfactory.maintenance-interval=60 # The time, in seconds, between runs of the pool's maintenance thread
    spring.jta.atomikos.connectionfactory.max-idle-time=60 # The time, in seconds, after which connections are cleaned up from the pool
    spring.jta.atomikos.connectionfactory.max-lifetime=0 # The time, in seconds, that a connection can be pooled for before being destroyed. 0 denotes no limit.
    spring.jta.atomikos.connectionfactory.max-pool-size=1 # The maximum size of the pool
    spring.jta.atomikos.connectionfactory.min-pool-size=1 # The minimum size of the pool
    spring.jta.atomikos.connectionfactory.reap-timeout=0 # The reap timeout, in seconds, for borrowed connections. 0 denotes no limit.
    spring.jta.atomikos.connectionfactory.unique-resource-name=jmsConnectionFactory # The unique name used to identify the resource during recovery
    spring.jta.atomikos.datasource.borrow-connection-timeout=30 # Timeout, in seconds, for borrowing connections from the pool
    spring.jta.atomikos.datasource.default-isolation-level= # Default isolation level of connections provided by the pool
    spring.jta.atomikos.datasource.login-timeout= # Timeout, in seconds, for establishing a database connection
    spring.jta.atomikos.datasource.maintenance-interval=60 # The time, in seconds, between runs of the pool's maintenance thread
    spring.jta.atomikos.datasource.max-idle-time=60 # The time, in seconds, after which connections are cleaned up from the pool
    spring.jta.atomikos.datasource.max-lifetime=0 # The time, in seconds, that a connection can be pooled for before being destroyed. 0 denotes no limit.
    spring.jta.atomikos.datasource.max-pool-size=1 # The maximum size of the pool
    spring.jta.atomikos.datasource.min-pool-size=1 # The minimum size of the pool
    spring.jta.atomikos.datasource.reap-timeout=0 # The reap timeout, in seconds, for borrowed connections. 0 denotes no limit.
    spring.jta.atomikos.datasource.test-query= # SQL query or statement used to validate a connection before returning it
    spring.jta.atomikos.datasource.unique-resource-name=dataSource # The unique name used to identify the resource during recovery

## bitronix ##

# BITRONIX
    spring.jta.bitronix.connectionfactory.acquire-increment=1 # Number of connections to create when growing the pool spring.jta.bitronix.connectionfactory.acquisition-interval=1 # Time, in seconds, to wait before trying to acquire a connection again after an invalid connection was acquired spring.jta.bitronix.connectionfactory.acquisition-timeout=30 # Timeout, in seconds, for acquiring connections from the pool spring.jta.bitronix.connectionfactory.allow-local-transactions=true # Whether or not the transaction manager should allow mixing XA and non-XA transactions spring.jta.bitronix.connectionfactory.apply-transaction-timeout=false # Whether or not the transaction timeout should be set on the XAResource when it is enlisted spring.jta.bitronix.connectionfactory.automatic-enlisting-enabled=true # Whether or not resources should be enlisted and delisted automatically spring.jta.bitronix.connectionfactory.cache-producers-consumers=true # Whether or not produces and consumers should be cached spring.jta.bitronix.connectionfactory.defer-connection-release=true # Whether or not the provider can run many transactions on the same connection and supports transaction interleaving spring.jta.bitronix.connectionfactory.ignore-recovery-failures=false # Whether or not recovery failures should be ignored spring.jta.bitronix.connectionfactory.max-idle-time=60 # The time, in seconds, after which connections are cleaned up from the pool spring.jta.bitronix.connectionfactory.max-pool-size=10 # The maximum size of the pool. 0 denotes no limit spring.jta.bitronix.connectionfactory.min-pool-size=0 # The minimum size of the pool spring.jta.bitronix.connectionfactory.password= # The password to use to connect to the JMS provider spring.jta.bitronix.connectionfactory.share-transaction-connections=false # Whether or not connections in the ACCESSIBLE state can be shared within the context of a transaction spring.jta.bitronix.connectionfactory.test-connections=true # Whether or not connections should be tested when acquired from the pool spring.jta.bitronix.connectionfactory.two-pc-ordering-position=1 # The postion that this resource should take during two-phase commit (always first is Integer.MIN_VALUE, always last is Integer.MAX_VALUE) spring.jta.bitronix.connectionfactory.unique-name=jmsConnectionFactory # The unique name used to identify the resource during recovery spring.jta.bitronix.connectionfactory.use-tm-join=true Whether or not TMJOIN should be used when starting XAResources spring.jta.bitronix.connectionfactory.user= # The user to use to connect to the JMS provider spring.jta.bitronix.datasource.acquire-increment=1 # Number of connections to create when growing the pool spring.jta.bitronix.datasource.acquisition-interval=1 # Time, in seconds, to wait before trying to acquire a connection again after an invalid connection was acquired spring.jta.bitronix.datasource.acquisition-timeout=30 # Timeout, in seconds, for acquiring connections from the pool spring.jta.bitronix.datasource.allow-local-transactions=true # Whether or not the transaction manager should allow mixing XA and non-XA transactions spring.jta.bitronix.datasource.apply-transaction-timeout=false # Whether or not the transaction timeout should be set on the XAResource when it is enlisted spring.jta.bitronix.datasource.automatic-enlisting-enabled=true # Whether or not resources should be enlisted and delisted automatically spring.jta.bitronix.datasource.cursor-holdability= # The default cursor holdability for connections spring.jta.bitronix.datasource.defer-connection-release=true # Whether or not the database can run many transactions on the same connection and supports transaction interleaving spring.jta.bitronix.datasource.enable-jdbc4-connection-test # Whether or not Connection.isValid() is called when acquiring a connection from the pool spring.jta.bitronix.datasource.ignore-recovery-failures=false # Whether or not recovery failures should be ignored spring.jta.bitronix.datasource.isolation-level= # The default isolation level for connections spring.jta.bitronix.datasource.local-auto-commit # The default auto-commit mode for local transactions spring.jta.bitronix.datasource.login-timeout= # Timeout, in seconds, for establishing a database connection spring.jta.bitronix.datasource.max-idle-time=60 # The time, in seconds, after which connections are cleaned up from the pool spring.jta.bitronix.datasource.max-pool-size=10 # The maximum size of the pool. 0 denotes no limit spring.jta.bitronix.datasource.min-pool-size=0 # The minimum size of the pool spring.jta.bitronix.datasource.prepared-statement-cache-size=0 # The target size of the prepared statement cache. 0 disables the cache spring.jta.bitronix.datasource.share-transaction-connections=false # Whether or not connections in the ACCESSIBLE state can be shared within the context of a transaction spring.jta.bitronix.datasource.test-query # SQL query or statement used to validate a connection before returning it spring.jta.bitronix.datasource.two-pc-ordering-position=1 # The postion that this resource should take during two-phase commit (always first is Integer.MIN_VALUE, always last is Integer.MAX_VALUE) spring.jta.bitronix.datasource.unique-name=dataSource # The unique name used to identify the resource during recovery spring.jta.bitronix.datasource.use-tm-join=true Whether or not TMJOIN should be used when starting XAResources

## solr ##

# SOLR (SolrProperties)
    spring.data.solr.host=http://127.0.0.1:8983/solr
    spring.data.solr.zk-host=
    spring.data.solr.repositories.enabled=true # if spring data repository support is enabled

## elasticsearch ##

# ELASTICSEARCH (ElasticsearchProperties)
    spring.data.elasticsearch.cluster-name= # The cluster name (defaults to elasticsearch)
    spring.data.elasticsearch.cluster-nodes= # The address(es) of the server node (comma-separated; if not specified starts a client node)
    spring.data.elasticsearch.properties.*= # Additional properties used to configure the client
    spring.data.elasticsearch.repositories.enabled=true # if spring data repository support is enabled

## data reset ##

# DATA REST (RepositoryRestConfiguration)
    spring.data.rest.base-uri= # base URI against which the exporter should calculate its links

## flyway ##

# FLYWAY (FlywayProperties)
    flyway.check-location=false # check that migration scripts location exists
    flyway.locations=classpath:db/migration # locations of migrations scripts
    flyway.schemas= # schemas to update flyway.init-version= 1 # version to start migration flyway.init-sqls= # SQL statements to execute to initialize a connection immediately after obtaining it flyway.sql-migration-prefix=V flyway.sql-migration-suffix=.sql flyway.enabled=true flyway.url= # JDBC url if you want Flyway to create its own DataSource flyway.user= # JDBC username if you want Flyway to create its own DataSource flyway.password= # JDBC password if you want Flyway to create its own DataSource

## liquibase ##

# LIQUIBASE (LiquibaseProperties)
    liquibase.change-log=classpath:/db/changelog/db.changelog-master.yaml
    liquibase.check-change-log-location=true # check the change log location exists
    liquibase.contexts= # runtime contexts to use
    liquibase.default-schema= # default database schema to use
    liquibase.drop-first=false
    liquibase.enabled=true
    liquibase.url= # specific JDBC url (if not set the default datasource is used)
    liquibase.user= # user name for liquibase.url
    liquibase.password= # password for liquibase.url

## jmx ##

# JMX
    spring.jmx.enabled=true # Expose MBeans from Spring

## pabbit ##

# RABBIT (RabbitProperties)
    spring.rabbitmq.host= # connection host
    spring.rabbitmq.port= # connection port
    spring.rabbitmq.addresses= # connection addresses (e.g. myhost:9999,otherhost:1111)
    spring.rabbitmq.username= # login user
    spring.rabbitmq.password= # login password
    spring.rabbitmq.virtual-host=
    spring.rabbitmq.dynamic=

## redis ##

# REDIS (RedisProperties)
    spring.redis.database= # database name
    spring.redis.host=localhost # server host
    spring.redis.password= # server password
    spring.redis.port=6379 # connection port
    spring.redis.pool.max-idle=8 # pool settings ...
    spring.redis.pool.min-idle=0
    spring.redis.pool.max-active=8
    spring.redis.pool.max-wait=-1
    spring.redis.sentinel.master= # name of Redis server
    spring.redis.sentinel.nodes= # comma-separated list of host:port pairs

## activemq ##

# ACTIVEMQ (ActiveMQProperties)
    spring.activemq.broker-url=tcp://localhost:61616 # connection URL
    spring.activemq.user=
    spring.activemq.password=
    spring.activemq.in-memory=true # broker kind to create if no broker-url is specified
    spring.activemq.pooled=false

## hornetQ ##

# HornetQ (HornetQProperties)
    spring.hornetq.mode= # connection mode (native, embedded)
    spring.hornetq.host=localhost # hornetQ host (native mode)
    spring.hornetq.port=5445 # hornetQ port (native mode)
    spring.hornetq.embedded.enabled=true # if the embedded server is enabled (needs hornetq-jms-server.jar)
    spring.hornetq.embedded.server-id= # auto-generated id of the embedded server (integer)
    spring.hornetq.embedded.persistent=false # message persistence
    spring.hornetq.embedded.data-directory= # location of data content (when persistence is enabled)
    spring.hornetq.embedded.queues= # comma-separated queues to create on startup
    spring.hornetq.embedded.topics= # comma-separated topics to create on startup
    spring.hornetq.embedded.cluster-password= # customer password (randomly generated by default)

## jms ##

# JMS (JmsProperties)
    spring.jms.jndi-name= # JNDI location of a JMS ConnectionFactory
    spring.jms.pub-sub-domain= # false for queue (default), true for topic

## email ##

# Email (MailProperties)
    spring.mail.host=smtp.acme.org # mail server host
    spring.mail.port= # mail server port
    spring.mail.username=
    spring.mail.password=
    spring.mail.default-encoding=UTF-8 # encoding to use for MimeMessages
    spring.mail.properties.*= # properties to set on the JavaMail session

## apring batch ##

# SPRING BATCH (BatchDatabaseInitializer)
    spring.batch.job.names=job1,job2
    spring.batch.job.enabled=true
    spring.batch.initializer.enabled=true
    spring.batch.schema= # batch schema to load

## aop ##

# AOP
    spring.aop.auto=
    spring.aop.proxy-target-class=

## file encoding ##

# FILE ENCODING (FileEncodingApplicationListener)
    spring.mandatory-file-encoding=false

## spring social ##

# SPRING SOCIAL (SocialWebAutoConfiguration)
    spring.social.auto-connection-views=true # Set to true for default connection views or false if you provide your own

## spring social facebook ##

# SPRING SOCIAL FACEBOOK (FacebookAutoConfiguration)
    spring.social.facebook.app-id= # your application's Facebook App ID
    spring.social.facebook.app-secret= # your application's Facebook App Secret

## spring social linkedin ##

# SPRING SOCIAL LINKEDIN (LinkedInAutoConfiguration)
    spring.social.linkedin.app-id= # your application's LinkedIn App ID
    spring.social.linkedin.app-secret= # your application's LinkedIn App Secret

## spring social twitter ##

# SPRING SOCIAL TWITTER (TwitterAutoConfiguration)
    spring.social.twitter.app-id= # your application's Twitter App ID
    spring.social.twitter.app-secret= # your application's Twitter App Secret

## spring mobile site preference ##

# SPRING MOBILE SITE PREFERENCE (SitePreferenceAutoConfiguration)
    spring.mobile.sitepreference.enabled=true # enabled by default

## spring mobile device views ##

# SPRING MOBILE DEVICE VIEWS (DeviceDelegatingViewResolverAutoConfiguration)
    spring.mobile.devicedelegatingviewresolver.enabled=true # disabled by default
    spring.mobile.devicedelegatingviewresolver.normal-prefix=
    spring.mobile.devicedelegatingviewresolver.normal-suffix=
    spring.mobile.devicedelegatingviewresolver.mobile-prefix=mobile/
    spring.mobile.devicedelegatingviewresolver.mobile-suffix=
    spring.mobile.devicedelegatingviewresolver.tablet-prefix=tablet/
    spring.mobile.devicedelegatingviewresolver.tablet-suffix=

## management http server ##

# MANAGEMENT HTTP SERVER (ManagementServerProperties)
    management.port= # defaults to 'server.port'
    management.address= # bind to a specific NIC
    management.context-path= # default to '/'
    management.add-application-context-header= # default to true
    management.security.enabled=true # enable security
    management.security.role=ADMIN # role required to access the management endpoint
    management.security.sessions=stateless # session creating policy to use (always, never, if_required, stateless)

## pid file ##

# PID FILE (ApplicationPidFileWriter)
    spring.pidfile= # Location of the PID file to write

## endpoints ##

# ENDPOINTS (AbstractEndpoint subclasses)
    endpoints.autoconfig.id=autoconfig
    endpoints.autoconfig.sensitive=true
    endpoints.autoconfig.enabled=true
    endpoints.beans.id=beans
    endpoints.beans.sensitive=true
    endpoints.beans.enabled=true
    endpoints.configprops.id=configprops
    endpoints.configprops.sensitive=true
    endpoints.configprops.enabled=true
    endpoints.configprops.keys-to-sanitize=password,secret,key # suffix or regex
    endpoints.dump.id=dump
    endpoints.dump.sensitive=true
    endpoints.dump.enabled=true
    endpoints.env.id=env
    endpoints.env.sensitive=true
    endpoints.env.enabled=true
    endpoints.env.keys-to-sanitize=password,secret,key # suffix or regex
    endpoints.health.id=health
    endpoints.health.sensitive=true
    endpoints.health.enabled=true
    endpoints.health.mapping.*= # mapping of health statuses to HttpStatus codes
    endpoints.health.time-to-live=1000
    endpoints.info.id=info
    endpoints.info.sensitive=false
    endpoints.info.enabled=true
    endpoints.mappings.enabled=true
    endpoints.mappings.id=mappings
    endpoints.mappings.sensitive=true
    endpoints.metrics.id=metrics
    endpoints.metrics.sensitive=true
    endpoints.metrics.enabled=true
    endpoints.shutdown.id=shutdown
    endpoints.shutdown.sensitive=true
    endpoints.shutdown.enabled=false
    endpoints.trace.id=trace
    endpoints.trace.sensitive=true
    endpoints.trace.enabled=true

## health indicators ##

# HEALTH INDICATORS (previously health.*)
    management.health.db.enabled=true
    management.health.diskspace.enabled=true
    management.health.mongo.enabled=true
    management.health.rabbit.enabled=true
    management.health.redis.enabled=true
    management.health.solr.enabled=true
    management.health.diskspace.path=.
    management.health.diskspace.threshold=10485760
    management.health.status.order=DOWN, OUT_OF_SERVICE, UNKNOWN, UP

## mvc only endpoint ##

# MVC ONLY ENDPOINTS
    endpoints.jolokia.path=jolokia
    endpoints.jolokia.sensitive=true
    endpoints.jolokia.enabled=true # when using Jolokia

## jmx endpoint ##

# JMX ENDPOINT (EndpointMBeanExportProperties)
    endpoints.jmx.enabled=true
    endpoints.jmx.domain= # the JMX domain, defaults to 'org.springboot'
    endpoints.jmx.unique-names=false
    endpoints.jmx.static-names=

## jolokia ##

# JOLOKIA (JolokiaProperties)
    jolokia.config.*= # See Jolokia manual

## remote shell ##

# REMOTE SHELL
    shell.auth=simple # jaas, key, simple, spring
    shell.command-refresh-interval=-1
    shell.command-path-patterns= # classpath*:/commands/**, classpath*:/crash/commands/**
    shell.config-path-patterns= # classpath*:/crash/*
    shell.disabled-commands=jpa*,jdbc*,jndi* # comma-separated list of commands to disable
    shell.disabled-plugins=false # don't expose plugins
    shell.ssh.enabled= # ssh settings ...
    shell.ssh.key-path=
    shell.ssh.port=
    shell.telnet.enabled= # telnet settings ...
    shell.telnet.port=
    shell.auth.jaas.domain= # authentication settings ...
    shell.auth.key.path=
    shell.auth.simple.user.name=
    shell.auth.simple.user.password=
    shell.auth.spring.roles=

## git info ##

# GIT INFO
    spring.git.properties= # resource ref to generated git info properties file

## devtools（转自网友） ##

# DEVTOOLS（开发工具属性）
    # 启用一个livereload.com兼容的服务器
    spring.devtools.livereload.enabled= true
    # # Server port.
    spring.devtools.livereload.port= 35729
    # 应该排除的触发完全重新启动的其他模式
    spring.devtools.restart.additional-exclude= 
    # 观看更改的附加路径
    spring.devtools.restart.additional-paths= 
    # 启用自动重启功能
    spring.devtools.restart.enabled= true
    # 应该排除的模式触发完全重新启动
    spring.devtools.restart.exclude= META-INF/maven/**,META-INF/resources/**,resources/**,static/**,public/**,templates/**,**/*Test.class,**/*Tests.class,git.properties
    # 轮询类路径更改之间等待的时间量（以毫秒为单位）
    spring.devtools.restart.poll-interval= 1000
    # 触发重新启动之前没有任何类路径更改所需的安静时间量（以毫秒为单位）
    spring.devtools.restart.quiet-period= 400
    # 更改后的特定文件的名称将触发重新启动检查。 如果未指定任何类路径文件更改将触发重新启动
    spring.devtools.restart.trigger-file= 
    # 远程开发工具属性
    # 用于处理远程连接的上下文路径。
    spring.devtools.remote.context-path= /.~~spring-boot!~
    # 启用远程调试支持。
    spring.devtools.remote.debug.enabled= true
    # 本地远程调试服务器端口。
    spring.devtools.remote.debug.local-port= 8000
    # 用于连接到远程应用程序的代理主机。
    spring.devtools.remote.proxy.host= 
    # 用于连接到远程应用程序的代理端口。
    spring.devtools.remote.proxy.port= 
    # 启用远程重启。
    spring.devtools.remote.restart.enabled= true
    # 建立连接所需的共享密钥（需要启用远程支持）
    spring.devtools.remote.secret= 
    # HTTP头用于传输共享密钥。</ span>
    spring.devtools.remote.secret-header-name= X-AUTH-TOKEN

# 二、SpringBoot MyBatis属性参考 #

因为MyBatis不在Spring-boot-starter-xx中，如果需要查找SpringBoot MyBatis属性手册请点击：[SpringBoot MyBatis属性手册][SpringBoot MyBatis]

[Link 1]: https://docs.spring.io/spring-boot/docs/1.2.3.RELEASE/reference/html/common-application-properties.html
[SpringBoot MyBatis]: https://blog.csdn.net/sinat_34104446/article/details/82628847