Android 8.1 非系统进程设置系统域属性问题

柔情只为你懂 2022-04-18 02:29 978阅读 0赞

#### 1. 进程间通过设置属性进行交互 ####

Android 系统开发中经常需要通过属性在各个进程间传递信息，通过一个进程 set\_property，另一个进程 get\_property 达到进程间通信的需求。

属性获取没有限制，但是如果需要进程可以进行设置属性操作，则需要做一些处理。因为在 init 进程属性设置处理过程中会进行 selinux 权限的检查，如果不通过的话，设置属性的请求会被拒绝。  
报错 fail 如下：

W libc    : Unable to set property "use_xxx" to "1": connection failed; errno=13 (Permission denied)

以一个进程为例，如果 a 进程需要在运行过程中设置属性，则需要添加在 device/xxx/common/sepolicy/a.te 文件中添加：

allow mediacodec default_prop:property_service set;
    （该命令可以通过 audit2allow 命令生成）

添加成功之后，重新编译 system/sepolicy/。

#### 2. android 8.1（及以上版本）系统设置权限限制 ####

这种方法在 8.1 以前的系统都可以通用，但是 Android 8.1 及以上版本系统添加了权限限制，不允许普通进程设置系统属性，编译错误如下:

FAILED: out/target/product/xxxx/obj/ETC/sepolicy_intermediates/sepolicy 
    /bin/bash -c "(out/host/linux-x86/bin/secilc -M true -G -c 30 out/target/product/xxxx/obj/ETC/plat_sepolicy.cil_intermediates/plat_sepolicy.cil out/target/product/xxxx/obj/ETC/27.0.cil_intermediates/27.0.cil out/target/product/xxxx/obj/ETC/nonplat_sepolicy.cil_intermediates/nonplat_sepolicy.cil -o out/target/product/xxxx/obj/ETC/sepolicy_intermediates/sepolicy.tmp -f /dev/null ) && (out/host/linux-x86/bin/sepolicy-analyze out/target/product/xxxx/obj/ETC/sepolicy_intermediates/sepolicy.tmp permissive > out/target/product/xxxx/obj/ETC/sepolicy_intermediates/sepolicy.permissivedomains ) && (if [ \"userdebug\" = \"user\" -a -s out/target/product/xxxx/obj/ETC/sepolicy_intermediates/sepolicy.permissivedomains ]; then 		echo \"==========\" 1>&2; 		echo \"ERROR: permissive domains not allowed in user builds\" 1>&2; 		echo \"List of invalid domains:\" 1>&2; 		cat out/target/product/xxxx/obj/ETC/sepolicy_intermediates/sepolicy.permissivedomains 1>&2; 	       exit 1; 		fi ) && (mv out/target/product/xxxx/obj/ETC/sepolicy_intermediates/sepolicy.tmp out/target/product/xxxx/obj/ETC/sepolicy_intermediates/sepolicy )"
    neverallow check failed at out/target/product/xxxx/obj/ETC/nonplat_sepolicy.cil_intermediates/nonplat_sepolicy.cil:2614
      (neverallow base_typeattr_4_27_0 default_prop_27_0 (property_service (set)))
        <root>
        allow at out/target/product/xxxx/obj/ETC/nonplat_sepolicy.cil_intermediates/nonplat_sepolicy.cil:6713
          (allow mediacodec_27_0 default_prop_27_0 (property_service (set)))
    
    neverallow check failed at out/target/product/xxxx/obj/ETC/plat_sepolicy.cil_intermediates/plat_sepolicy.cil:4287 from system/sepolicy/public/domain.te:447
      (neverallow base_typeattr_4 default_prop (property_service (set)))
        <root>
        allow at out/target/product/xxxx/obj/ETC/nonplat_sepolicy.cil_intermediates/nonplat_sepolicy.cil:6713
          (allow mediacodec_27_0 default_prop_27_0 (property_service (set)))
    
    Failed to generate binary
    Failed to build policydb
    [ 34% 23/66] build out/target/product/xxxx/obj/ETC/precompiled_sepolicy_intermediates/precompiled_sepolicy
    FAILED: out/target/product/xxxx/obj/ETC/precompiled_sepolicy_intermediates/precompiled_sepolicy 
    /bin/bash -c "out/host/linux-x86/bin/secilc -M true -G -c 30 		out/target/product/xxxx/obj/ETC/plat_sepolicy.cil_intermediates/plat_sepolicy.cil out/target/product/xxxx/obj/ETC/27.0.cil_intermediates/27.0.cil out/target/product/xxxx/obj/ETC/nonplat_sepolicy.cil_intermediates/nonplat_sepolicy.cil -o out/target/product/xxxx/obj/ETC/precompiled_sepolicy_intermediates/precompiled_sepolicy -f /dev/null"
    neverallow check failed at out/target/product/xxxx/obj/ETC/nonplat_sepolicy.cil_intermediates/nonplat_sepolicy.cil:2614
      (neverallow base_typeattr_4_27_0 default_prop_27_0 (property_service (set)))
        <root>
        allow at out/target/product/xxxx/obj/ETC/nonplat_sepolicy.cil_intermediates/nonplat_sepolicy.cil:6713
          (allow mediacodec_27_0 default_prop_27_0 (property_service (set)))
    
    neverallow check failed at out/target/product/xxxx/obj/ETC/plat_sepolicy.cil_intermediates/plat_sepolicy.cil:4287 from system/sepolicy/public/domain.te:447
      (neverallow base_typeattr_4 default_prop (property_service (set)))
        <root>
        allow at out/target/product/xxxx/obj/ETC/nonplat_sepolicy.cil_intermediates/nonplat_sepolicy.cil:6713
          (allow mediacodec_27_0 default_prop_27_0 (property_service (set)))
    
    Failed to generate binary
    Failed to build policydb
    ninja: build stopped: subcommand failed.
    20:55:56 ninja failed with: exit status 1
    
    #### failed to build some targets (02:13 (mm:ss)) ####

##### 修正解决方案 1 #####

允许 mediacodec 进程设置 use\_xxx 属性

diff --git a/sepolicy/mediacodec.te b/sepolicy/mediacodec.te
    index 3530bec..a3a0c38 100644
    --- a/sepolicy/mediacodec.te
    +++ b/sepolicy/mediacodec.te
    @@ -5,4 +5,8 @@ allow mediacodec media_prop:file { open read getattr };
     allow mediacodec system_file:dir { open read };
     allow mediacodec sysfs:file { read open getattr };
     allow mediacodec sysfs:dir { read open getattr };
     get_prop(mediacodec,ctsgts_prop);
    +set_prop(mediacodec,use_mpp_mode_prop);
    diff --git a/sepolicy/property.te b/sepolicy/property.te
    index c71f976..5912a09 100755
    --- a/sepolicy/property.te
    +++ b/sepolicy/property.te
    @@ -2,5 +2,6 @@ type graphic_prop, property_type;
     type drm_prop, property_type, mlstrustedsubject;
     type media_prop, property_type, mlstrustedsubject;
     type ctsgts_prop, property_type, mlstrustedsubject;
    +type use_xxx_prop, property_type, mlstrustedsubject;
     type secureboot_prop, property_type;
     type tee_supplicant_prop, property_type;
    diff --git a/sepolicy/property_contexts b/sepolicy/property_contexts
    index cd31e89..af47380 100755
    --- a/sepolicy/property_contexts
    +++ b/sepolicy/property_contexts
    @@ -5,6 +5,7 @@ media.                  u:object_r:media_prop:s0
     mediaplayer.            u:object_r:media_prop:s0
     cts_gts.                u:object_r:ctsgts_prop:s0
     persist.cts_gts.        u:object_r:ctsgts_prop:s0
    +use_xxx                 u:object_r:use_xxx_prop:s0
     pppoe.                  u:object_r:dhcp_prop:s0
     persist.ppp             u:object_r:dhcp_prop:s0
     ro.secureboot           u:object_r:secureboot_prop:s0

##### 修正解决方案 2 #####

非系统域的属性设置则没有如上限制，可以将 use\_xxx 属性修改为 vendor.use\_xxx 改为 vender 域的属性