Altium Designer常用快捷键

灰太狼 2022-04-13 07:58 243阅读 0赞

<table style="width:500px;"> 
 <thead> 
 <tr> 
 <th style="width:262px;">功能</th> 
 <th style="width:236px;">按键</th> 
 </tr> 
 </thead> 
 <tbody> 
 <tr> 
 <td style="width:262px;">旋转</td> 
 <td style="width:236px;">Space</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">X轴镜像</td> 
 <td style="width:236px;">X</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">Y轴镜像</td> 
 <td style="width:236px;">Y</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">板层管理</td> 
 <td style="width:236px;">L</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">栅格设置</td> 
 <td style="width:236px;">G</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">切换单位</td> 
 <td style="width:236px;">Q</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">&nbsp;</td> 
 <td style="width:236px;">&nbsp;</td> 
 </tr> 
 <tr> 
 <td colspan="2">Place</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">放置-坐标</td> 
 <td style="width:236px;">P，O</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">放置-焊盘</td> 
 <td style="width:236px;">P，P</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">放置-字符</td> 
 <td style="width:236px;">P，S</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">放置-过孔</td> 
 <td style="width:236px;">P，V</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">放置-多边形</td> 
 <td style="width:236px;">P，R</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">放置-填充</td> 
 <td style="width:236px;">P，F</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">放置-铺铜</td> 
 <td style="width:236px;">P，G</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">放置-线性尺寸</td> 
 <td style="width:236px;">P，D，L</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">放置-走线</td> 
 <td style="width:236px;">P，T</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">放置-差分对布线</td> 
 <td style="width:236px;">P，I</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">放置-多根布线</td> 
 <td style="width:236px;">P，M，Enter</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">&nbsp;</td> 
 <td style="width:236px;">&nbsp;</td> 
 </tr> 
 <tr> 
 <td colspan="2">Align</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">对齐-水平对齐</td> 
 <td style="width:236px;">A，D</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">对齐-垂直对齐</td> 
 <td style="width:236px;">A，S</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">对齐-顶部对齐</td> 
 <td style="width:236px;">A，T</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">对齐-底部对齐</td> 
 <td style="width:236px;">A，R</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">对齐-左对齐</td> 
 <td style="width:236px;">A，L</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">对齐-右对齐</td> 
 <td style="width:236px;">A，R</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">&nbsp;</td> 
 <td style="width:236px;">&nbsp;</td> 
 </tr> 
 <tr> 
 <td colspan="2">Design</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">类设置</td> 
 <td style="width:236px;">D，C</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">板层管理</td> 
 <td style="width:236px;">D，K</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">规则</td> 
 <td style="width:236px;">D，R</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">规则向导</td> 
 <td style="width:236px;">D，W</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">拷贝ROOM格式</td> 
 <td style="width:236px;">D，M，C</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">放置ROOM</td> 
 <td style="width:236px;">D，M，R</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">根据选择对象定义板子形状</td> 
 <td style="width:236px;">D，S，D</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">编辑网络</td> 
 <td style="width:236px;">D，N，N</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">&nbsp;</td> 
 <td style="width:236px;">&nbsp;</td> 
 </tr> 
 <tr> 
 <td colspan="2">Edit</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">编辑-特殊黏贴</td> 
 <td style="width:236px;">E，A</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">编辑=删除</td> 
 <td style="width:236px;">E，D</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">编辑-切断轨迹</td> 
 <td style="width:236px;">E，K</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">编辑-设定原点</td> 
 <td style="width:236px;">E，O，S</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">编辑-复位原点</td> 
 <td style="width:236px;">E，O，R</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">编辑-清除选择-外部</td> 
 <td style="width:236px;">E，E，O</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">编辑-清除选择-内部</td> 
 <td style="width:236px;">E，E，I</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">编辑-移动-旋转</td> 
 <td style="width:236px;">E，M，O</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">&nbsp;</td> 
 <td style="width:236px;">&nbsp;</td> 
 </tr> 
 <tr> 
 <td colspan="2">Select</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">选择-全选</td> 
 <td style="width:236px;">S，A</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">选择-线选</td> 
 <td style="width:236px;">S，L</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">选择-区域（内部）</td> 
 <td style="width:236px;"> S，I </td> 
 </tr> 
 <tr> 
 <td style="width:262px;">选择-区域（外部）</td> 
 <td style="width:236px;">S，O</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">&nbsp;</td> 
 <td style="width:236px;">&nbsp;</td> 
 </tr> 
 <tr> 
 <td colspan="2">File</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">文件-导出PDF文件</td> 
 <td style="width:236px;">F，M</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">文件-导出坐标文件</td> 
 <td style="width:236px;">F，B，G</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">文件-导出装配文件</td> 
 <td style="width:236px;">F，B，A</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">&nbsp;</td> 
 <td style="width:236px;">&nbsp;</td> 
 </tr> 
 <tr> 
 <td colspan="2">Jump</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">跳转-新坐标</td> 
 <td style="width:236px;">J，L</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">&nbsp;</td> 
 <td style="width:236px;">&nbsp;</td> 
 </tr> 
 <tr> 
 <td colspan="2">Move</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">移动-移动</td> 
 <td style="width:236px;">M，M</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">移动-旋转</td> 
 <td style="width:236px;">M，O</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">移动-拖拽</td> 
 <td style="width:236px;">M，D</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">移动-器件</td> 
 <td style="width:236px;">M，C</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">移动-打断走线</td> 
 <td style="width:236px;">M，B</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">移动-器件反转板层</td> 
 <td style="width:236px;">M，I</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">&nbsp;</td> 
 <td style="width:236px;">&nbsp;</td> 
 </tr> 
 <tr> 
 <td colspan="2">Net</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">网络-显示网络</td> 
 <td style="width:236px;">N，S，N</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">网络-显示器件</td> 
 <td style="width:236px;">N，S，O</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">网络-显示全部</td> 
 <td style="width:236px;">N，S，A</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">网络-隐藏网络</td> 
 <td style="width:236px;">N，H，N</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">网络-隐藏器件</td> 
 <td style="width:236px;">N，H，O</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">网络-隐藏全部</td> 
 <td style="width:236px;">N，H，A</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">&nbsp;</td> 
 <td style="width:236px;">&nbsp;</td> 
 </tr> 
 <tr> 
 <td colspan="2">Report</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">报告-导出BOM</td> 
 <td style="width:236px;">R，I</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">&nbsp;</td> 
 <td style="width:236px;">&nbsp;</td> 
 </tr> 
 <tr> 
 <td colspan="2">Tool</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">工具-交叉探测对象</td> 
 <td style="width:236px;">T，C</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">工具-泪滴选项</td> 
 <td style="width:236px;">T，E</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">工具-优先选项</td> 
 <td style="width:236px;">T，P</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">工具-运行设计规则检查</td> 
 <td style="width:236px;">T，D，R</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">工具-添加缝纫焊盘</td> 
 <td style="width:236px;">T，H，A</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">工具-复位错误标志</td> 
 <td style="width:236px;">T，M</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">工具-铺铜管理</td> 
 <td style="width:236px;">T，G，M</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">工具-隐藏铺铜</td> 
 <td style="width:236px;">T，G，H</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">工具-显示铺铜</td> 
 <td style="width:236px;">T，G，E</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">工具-更新铺铜</td> 
 <td style="width:236px;">T，G，A</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">工具-从选择元素创建板剪切</td> 
 <td style="width:236px;">T，V，B</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">工具-从选择元素创建板多边形</td> 
 <td style="width:236px;">T，V，E</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">&nbsp;</td> 
 <td style="width:236px;">&nbsp;</td> 
 </tr> 
 <tr> 
 <td colspan="2">Unconnect</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">取消布线-全部</td> 
 <td style="width:236px;">U，A</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">取消布线--网络</td> 
 <td style="width:236px;">U，B</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">取消布线-连接</td> 
 <td style="width:236px;">U，D</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">取消布线-器件</td> 
 <td style="width:236px;">U，F</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">取消布线-ROOM</td> 
 <td style="width:236px;">U，H</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">&nbsp;</td> 
 <td style="width:236px;">&nbsp;</td> 
 </tr> 
 <tr> 
 <td colspan="2">View</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">查看-合适区域</td> 
 <td style="width:236px;">V，A</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">查看-反转板子</td> 
 <td style="width:236px;">V，B</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">查看-适合文件</td> 
 <td style="width:236px;">V，D</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">查看-合适板子</td> 
 <td style="width:236px;">V，F</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">查看-合适图纸</td> 
 <td style="width:236px;">V，H</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">&nbsp;</td> 
 <td style="width:236px;">&nbsp;</td> 
 </tr> 
 <tr> 
 <td colspan="2">Ctrl</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">测距</td> 
 <td style="width:236px;">Ctrl + M</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">智能走线（在放置走线状态）</td> 
 <td style="width:236px;">Ctrl + 左键</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">翻转板子</td> 
 <td style="width:236px;">Ctrl + F</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">&nbsp;</td> 
 <td style="width:236px;">&nbsp;</td> 
 </tr> 
 <tr> 
 <td colspan="2">Shift</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">清除蒙板</td> 
 <td style="width:236px;">Shift + C</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">查找相似对象</td> 
 <td style="width:236px;">Shift + F</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">显示走线宽度</td> 
 <td style="width:236px;">Shift + G</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">单层显示</td> 
 <td style="width:236px;">Shift + S</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">显示冲突（鼠标放在冲突区域）</td> 
 <td style="width:236px;">Shift + V</td> 
 </tr> 
 <tr> 
 <td colspan="2">走线模式</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">改变走线模式</td> 
 <td style="width:236px;">Shift + Space</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">选择过孔</td> 
 <td style="width:236px;">Shift + V</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">选择常见线宽（可自由定制）</td> 
 <td style="width:236px;">Shift + W</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">&nbsp;</td> 
 <td style="width:236px;">&nbsp;</td> 
 </tr> 
 <tr> 
 <td colspan="2">Design</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">切换二维显示</td> 
 <td style="width:236px;">2（主键盘）</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">切换三维显示</td> 
 <td style="width:236px;">3（主键盘）</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">顶层底层切换</td> 
 <td style="width:236px;">*（小键盘）</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">板层切换</td> 
 <td style="width:236px;">+ / -（小键盘）</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">&nbsp;</td> 
 <td style="width:236px;">&nbsp;</td> 
 </tr> 
 <tr> 
 <td colspan="2">右键</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">器件联合</td> 
 <td style="width:236px;">右键，U</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">&nbsp;</td> 
 <td style="width:236px;">&nbsp;</td> 
 </tr> 
 <tr> 
 <td colspan="2">3D模式下</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">0°旋转</td> 
 <td style="width:236px;">0（主键盘）</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">90°旋转</td> 
 <td style="width:236px;">9（主键盘）</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">&nbsp;</td> 
 <td style="width:236px;">&nbsp;</td> 
 </tr> 
 <tr> 
 <td colspan="2">走线模式</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">增大弧度</td> 
 <td style="width:236px;">长按 &gt;</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">减小弧度</td> 
 <td style="width:236px;">长按 &lt;</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">减小多根交互式布线间距</td> 
 <td style="width:236px;">长按 Ctrl + B</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">增加多根交互式布线间距</td> 
 <td style="width:236px;">长按 Shift + B</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">&nbsp;</td> 
 <td style="width:236px;">&nbsp;</td> 
 </tr> 
 <tr> 
 <td colspan="2">等长调节</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">工具-网络等长调节</td> 
 <td style="width:236px;">T，R</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">增加蛇形线拐弯弧度</td> 
 <td style="width:236px;">1</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">减少蛇形线拐弯弧度</td> 
 <td style="width:236px;">2</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">增加蛇形线宽度</td> 
 <td style="width:236px;">3</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">减小蛇形线宽度</td> 
 <td style="width:236px;">4</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">增加蛇形线拐角幅度</td> 
 <td style="width:236px;">。</td> 
 </tr> 
 <tr> 
 <td style="width:262px;">减少蛇形线拐角幅度</td> 
 <td style="width:236px;">，</td> 
 </tr> 
 </tbody> 
</table>