CentOS 1810 源码安装使用 Nginx

蔚落 2022-03-07 14:20 187阅读 0赞

Nginx 官方文档：[Installing NGINX Open Source][]

[CentOS 1810 预构建安装使用 Nginx][CentOS 1810 _ Nginx]

[CentOS 使用 Nginx 实现 同一台服务器 多域名 对应 多项目][CentOS _ Nginx _ _ _ _]

--------------------

### **本教程旨在安装最少的软件，最小程度的影响现有系统来安装 Nginx。 ** ###

--------------------

1.  更新 CentOS：
    
        yum -y update
2.  安装常用软件：
    
        yum -y install wget vim bash-completion
    
    wget：用于下载 Nginx（可选），或者使用 Xftp 上传 Nginx（不推荐，本地上传运营商网速受限）。  
    vim：编辑软件（可选），或者使用 vim 编辑器（不推荐）。  
    bash-completion：可使用 Tab（可选），方便命令输入，有效防止输错命令（推荐）。  
     
3.  下载 Nginx：
    
        wget http://nginx.org/download/nginx-1.15.10.tar.gz
    
    Nginx 官网：[http://nginx.org][http_nginx.org]  
    Nginx 下载页面：[http://nginx.org/en/download.html][http_nginx.org_en_download.html]  
     
4.  解压 Nginx：
    
        tar -zxvf nginx-1.15.10.tar.gz
5.  进入 Nginx 文件夹：
    
        cd nginx-1.15.10
6.  配置 Nginx：
    
        ./configure
    
     
    
    1.  如果显示：
        
            checking for OS
             + Linux 3.10.0-957.5.1.el7.x86_64 x86_64
            checking for C compiler ... not found
            
            ./configure: error: C compiler cc is not found
        
        说明缺少 gcc，安装gcc：
        
            yum -y install gcc
        
        再次运行：
        
            ./configure
    2.  如果显示：
        
            ./configure: error: the HTTP rewrite module requires the PCRE library.
            You can either disable the module by using --without-http_rewrite_module
            option, or install the PCRE library into the system, or build the PCRE library
            statically from the source with nginx by using --with-pcre=<path> option.
        
        说明缺少 pcre-devel，安装pcre-devel：
        
            yum -y install pcre-devel
        
        再次运行：
        
            ./configure
    3.  如果显示：
        
            ./configure: error: the HTTP gzip module requires the zlib library.
            You can either disable the module by using --without-http_gzip_module
            option, or install the zlib library into the system, or build the zlib library
            statically from the source with nginx by using --with-zlib=<path> option.
        
        说明缺少 zlib-devel，安装zlib-devel：
        
            yum -y install zlib-devel
        
        再次运行：
        
            ./configure
    4.  如果显示：
        
            Configuration summary
              + using system PCRE library
              + OpenSSL library is not used
              + using system zlib library
            
              nginx path prefix: "/usr/local/nginx"
              nginx binary file: "/usr/local/nginx/sbin/nginx"
              nginx modules path: "/usr/local/nginx/modules"
              nginx configuration prefix: "/usr/local/nginx/conf"
              nginx configuration file: "/usr/local/nginx/conf/nginx.conf"
              nginx pid file: "/usr/local/nginx/logs/nginx.pid"
              nginx error log file: "/usr/local/nginx/logs/error.log"
              nginx http access log file: "/usr/local/nginx/logs/access.log"
              nginx http client request body temporary files: "client_body_temp"
              nginx http proxy temporary files: "proxy_temp"
              nginx http fastcgi temporary files: "fastcgi_temp"
              nginx http uwsgi temporary files: "uwsgi_temp"
              nginx http scgi temporary files: "scgi_temp"
        
        翻译：
        
            配置摘要
               +使用系统PCRE库
               +未使用OpenSSL库
               +使用系统zlib库
            
               nginx路径前缀："/usr/local/nginx"
               nginx二进制文件："/usr/local/nginx/sbin/nginx"
               nginx模块路径："/usr/local/nginx/modules"
               nginx配置前缀："/usr/local/nginx/conf"
               nginx配置文件："/usr/local/nginx/conf/nginx.conf"
               nginx pid文件："/usr/local/nginx/logs/nginx.pid"
               nginx错误日志文件："/usr/local/nginx/logs/error.log"
               nginx http访问日志文件："/usr/local/nginx/logs/access.log"
               nginx http客户端请求正文临时文件："client_body_temp"
               nginx http代理临时文件："proxy_temp"
               nginx http fastcgi临时文件："fastcgi_temp"
               nginx http uwsgi临时文件："uwsgi_tem"
               nginx http scgi临时文件："scgi_temp"
        
        由上可知，未启动 OpenSSL ，如果不启动，配置 SSL 或出现错误，启动方法：
        
            ./configure --with-http_ssl_module
        
        如果出现：
        
            ./configure: error: SSL modules require the OpenSSL library.
            You can either do not enable the modules, or install the OpenSSL library
            into the system, or build the OpenSSL library statically from the source
            with nginx by using --with-openssl=<path> option.
        
        说明没有安装 openssl-devel，安装 openssl-devel：
        
            yum -y install openssl-devel
        
        重新运行：
        
            ./configure --with-http_ssl_module
            
            # 开启 http2
            # ./configure --with-http_ssl_module --with-http_v2_module
        
        如果出现：
        
            Configuration summary
              + using system PCRE library
              + using system OpenSSL library
              + using system zlib library
            
              nginx path prefix: "/usr/local/nginx"
              nginx binary file: "/usr/local/nginx/sbin/nginx"
              nginx modules path: "/usr/local/nginx/modules"
              nginx configuration prefix: "/usr/local/nginx/conf"
              nginx configuration file: "/usr/local/nginx/conf/nginx.conf"
              nginx pid file: "/usr/local/nginx/logs/nginx.pid"
              nginx error log file: "/usr/local/nginx/logs/error.log"
              nginx http access log file: "/usr/local/nginx/logs/access.log"
              nginx http client request body temporary files: "client_body_temp"
              nginx http proxy temporary files: "proxy_temp"
              nginx http fastcgi temporary files: "fastcgi_temp"
              nginx http uwsgi temporary files: "uwsgi_temp"
              nginx http scgi temporary files: "scgi_temp"
        
        翻译：
        
            配置摘要
            +使用系统PCRE库
            +使用系统OpenSSL库
            +使用系统zlib库
            
            Nginx路径前缀："/usr/local/nginx"
            Nginx二进制文件："/usr/local/nginx/sbin/nginx"
            Nginx模块路径："/usr/local/nginx/modules"
            Nginx配置前缀："/usr/local/nginx/conf"
            Nginx配置文件："/usr/local/nginx/conf/nginx.conf"
            Nginx pid文件："/usr/local/nginx/logs/nginx.pid"
            Nginx错误日志文件："/usr/local/nginx/logs/error.log"
            Nginx http访问日志文件："/usr/local/nginx/logs/access.log"
            Nginx http客户端请求正文临时文件："client_body_temp"
            Nginx http代理临时文件："proxy_temp"
            Nginx http fastcgi临时文件："fastcgi_temp"
            Nginx http uwsgi临时文件："uwsgi_temp"
            Nginx http scgi临时文件："scgi_temp"
        
        由上可知，安装前已无任何问题，安装路径等信息显示如上所示。
7.  编译 Nginx：
    
        make
    
    如果显示：
    
        objs/ngx_modules.o \
        -ldl -lpthread -lcrypt -lpcre -lssl -lcrypto -ldl -lpthread -lz \
        -Wl,-E
        sed -e "s|%%PREFIX%%|/usr/local/nginx|" \
        	-e "s|%%PID_PATH%%|/usr/local/nginx/logs/nginx.pid|" \
        	-e "s|%%CONF_PATH%%|/usr/local/nginx/conf/nginx.conf|" \
        	-e "s|%%ERROR_LOG_PATH%%|/usr/local/nginx/logs/error.log|" \
        	< man/nginx.8 > objs/nginx.8
        make[1]: Leaving directory `/root/nginx-1.15.10'
    
    说明没有问题。  
     
8.  安装 Nginx：
    
        make install
    
    如果显示：
    
        make -f objs/Makefile install
        make[1]: Entering directory `/root/nginx-1.15.10'
        test -d '/usr/local/nginx' || mkdir -p '/usr/local/nginx'
        test -d '/usr/local/nginx/sbin' \
        	|| mkdir -p '/usr/local/nginx/sbin'
        test ! -f '/usr/local/nginx/sbin/nginx' \
        	|| mv '/usr/local/nginx/sbin/nginx' \
        		'/usr/local/nginx/sbin/nginx.old'
        cp objs/nginx '/usr/local/nginx/sbin/nginx'
        test -d '/usr/local/nginx/conf' \
        	|| mkdir -p '/usr/local/nginx/conf'
        cp conf/koi-win '/usr/local/nginx/conf'
        cp conf/koi-utf '/usr/local/nginx/conf'
        cp conf/win-utf '/usr/local/nginx/conf'
        test -f '/usr/local/nginx/conf/mime.types' \
        	|| cp conf/mime.types '/usr/local/nginx/conf'
        cp conf/mime.types '/usr/local/nginx/conf/mime.types.default'
        test -f '/usr/local/nginx/conf/fastcgi_params' \
        	|| cp conf/fastcgi_params '/usr/local/nginx/conf'
        cp conf/fastcgi_params \
        	'/usr/local/nginx/conf/fastcgi_params.default'
        test -f '/usr/local/nginx/conf/fastcgi.conf' \
        	|| cp conf/fastcgi.conf '/usr/local/nginx/conf'
        cp conf/fastcgi.conf '/usr/local/nginx/conf/fastcgi.conf.default'
        test -f '/usr/local/nginx/conf/uwsgi_params' \
        	|| cp conf/uwsgi_params '/usr/local/nginx/conf'
        cp conf/uwsgi_params \
        	'/usr/local/nginx/conf/uwsgi_params.default'
        test -f '/usr/local/nginx/conf/scgi_params' \
        	|| cp conf/scgi_params '/usr/local/nginx/conf'
        cp conf/scgi_params \
        	'/usr/local/nginx/conf/scgi_params.default'
        test -f '/usr/local/nginx/conf/nginx.conf' \
        	|| cp conf/nginx.conf '/usr/local/nginx/conf/nginx.conf'
        cp conf/nginx.conf '/usr/local/nginx/conf/nginx.conf.default'
        test -d '/usr/local/nginx/logs' \
        	|| mkdir -p '/usr/local/nginx/logs'
        test -d '/usr/local/nginx/logs' \
        	|| mkdir -p '/usr/local/nginx/logs'
        test -d '/usr/local/nginx/html' \
        	|| cp -R html '/usr/local/nginx'
        test -d '/usr/local/nginx/logs' \
        	|| mkdir -p '/usr/local/nginx/logs'
        make[1]: Leaving directory `/root/nginx-1.15.10'
    
    说明没有问题。  
     
9.  查看 Nginx 版本：
    
        /usr/local/nginx/sbin/nginx -v
    
    显示为：
    
        nginx version: nginx/1.15.10
10. 测试 Nginx：
    
        /usr/local/nginx/sbin/nginx -t
    
    显示为：
    
        nginx: the configuration file /usr/local/nginx/conf/nginx.conf syntax is ok
        nginx: configuration file /usr/local/nginx/conf/nginx.conf test is successful
11. 启动 Nginx：
    
        /usr/local/nginx/sbin/nginx
    
    什么都不显示。说明正常启动了。  
    如果显示：
    
        [root@CentOS-7-x86-64-DVD-1810 nginx-1.15.10]# /usr/local/nginx/sbin/nginx
        nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use)
        nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use)
        nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use)
        nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use)
        nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use)
        nginx: [emerg] still could not bind()
    
    说明重复启动了。  
     
12. 停止 Nginx：
    
        /usr/local/nginx/sbin/nginx -s stop
    
    什么都不显示，说明已停止了。  
    如果显示：
    
        nginx: [error] open() "/usr/local/nginx/logs/nginx.pid" failed (2: No such file or directory)
    
    说明重复停止了。  
      
     
13. 强制停止：
    
        pkill nginx
14. 访问 Nginx：
    
    1.  打开防火墙：
        
        1.  查看防火墙状态：
            
                systemctl status firewalld
        2.  打开防火墙：
            
                systemctl start firewalld.service
        3.  关闭防火墙：
            
                systemctl stop firewalld.service
        4.  防火墙开机自启：
            
                systemctl enable firewalld.service
        5.  关闭防火墙开机自启：
            
                systemctl disable firewalld.service
        6.  查看防火墙开机自启：
            
                systemctl list-unit-files |grep firewalld.service
    2.  打开 http 端口：
        
            firewall-cmd --zone=public --add-service=http --permanent
        
        或者为（打开 80 端口）：
        
            firewall-cmd --zone=public --add-port=80/tcp --permanent
        
        关闭将 **add** 换为 **remove**。  
         
    3.  重新加载防火墙：
        
            firewall-cmd --reload
        
        或重启防火墙（不推荐，防火墙将出现中断）：
        
            systemctl restart firewalld.service
    4.  查看防火墙已启动的端口（服务）：
        
            firewall-cmd --list-all
        
        显示：
        
            public (active)
              target: default
              icmp-block-inversion: no
              interfaces: ens33
              sources: 
              services: ssh dhcpv6-client http
              ports: 
              protocols: 
              masquerade: no
              forward-ports: 
              source-ports: 
              icmp-blocks: 
              rich rules:
        
        访问 Nginx：  
        ![watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3FxXzMyNTk2NTI3_size_16_color_FFFFFF_t_70][]
15. 开机自启：  
    **注意：设置开机自启前需要先将 Nginx 停止（命令：pkill nginx）。**
    
    1.  创建并编辑开机启动文件：
        
            vim /lib/systemd/system/nginx.service
        
        按 i 输入以下内容：
        
            [Unit]
            Description=nginx
            After=network.target
            
            [Service]
            Type=forking
            ExecStart=/usr/local/nginx/sbin/nginx
            ExecReload=/usr/local/nginx/sbin/nginx -s reload
            ExecStop=/usr/local/nginx/sbin/nginx -s stop
            PrivateTmp=true
            
            [Install]
            WantedBy=multi-user.target
    2.  启动 Nginx：
        
            systemctl start nginx.service
    3.  关闭 Nginx：
        
            systemctl stop nginx.service
    4.  查看 Nginx：
        
            systemctl status nginx.service
    5.  设置开机启动：
        
            systemctl enable nginx.service
    6.  查看开机启动：
        
            systemctl list-unit-files |grep nginx.service
16. 配置 SSL：  
    采用腾讯云的 SSL（免费申请）。  
    参考文档（腾讯云）：[证书安装指引][Link 1]
    
    1.  将 腾讯云 Nginx 版 SSL 上传至 /usr/local/nginx/conf 目录，如：
        
            [root@CentOS-7-x86-64-DVD-1810 conf]# ls
            1_www.wimcom.cn_bundle.crt  fastcgi.conf.default    koi-utf     mime.types.default  scgi_params          uwsgi_params.default
            2_www.wimcom.cn.key         fastcgi_params          koi-win     nginx.conf          scgi_params.default  win-utf
            fastcgi.conf                fastcgi_params.default  mime.types  nginx.conf.default  uwsgi_params
    2.  编辑 Nginx 配置文件：
        
            vim /usr/local/nginx/conf/nginx.conf
        
        添加（注意位置，在倒数第二行添加，倒数第一行是一个后花括号 **\}** ）：
        
            server {
                    listen 443 ssl;
                    server_name www.wimcom.cn;
                    ssl on;
                    ssl_certificate 1_www.wimcom.cn_bundle.crt;
                    ssl_certificate_key 2_www.wimcom.cn.key;
                    ssl_session_timeout 5m;
                    ssl_protocols TLSv1 TLSv1.1 TLSv1.2;
                    ssl_ciphers ECDHE-RSA-AES128-GCM-SHA256:HIGH:!aNULL:!MD5:!RC4:!DHE;
                    ssl_prefer_server_ciphers on;
                    location / {
                        root   html;
                        index  index.html index.htm;
                    }
                }
    3.  测试：
        
            /usr/local/nginx/sbin/nginx -t
        
        出现：
        
            nginx: [warn] the "ssl" directive is deprecated, use the "listen ... ssl" directive instead in /usr/local/nginx/conf/nginx.conf:122
            nginx: the configuration file /usr/local/nginx/conf/nginx.conf syntax is ok
            nginx: configuration file /usr/local/nginx/conf/nginx.conf test is successful
        
        说明配置成功，至于有警告，删除 上面 第2步 中的 **ssl on;** 即可。
    4.  重启 Nginx：
        
            systemctl restart nginx.service
    5.  修改本地Host（本人采用的是虚拟机，如果是服务器，需要修改解析）：
        
        1.  host所在的文件夹为 C:\\Windows\\System32\\drivers\\etc ；
        2.  直接使用 记事本 打开并修改后，不能保存（没有权限）；
        3.  域名（wimcom.cn）及域名前带www（www.wimcom.cn）的 SSL 为相同的文件。
        4.  直接可使用 Dism++（官网：[https://www.chuyu.me][https_www.chuyu.me]） 软件进行修改；  
            ![watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3FxXzMyNTk2NTI3_size_16_color_FFFFFF_t_70 1][]  
            ![watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3FxXzMyNTk2NTI3_size_16_color_FFFFFF_t_70 2][]
    6.  访问 https：  
        https://www.wimcom.cn  
        ![watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3FxXzMyNTk2NTI3_size_16_color_FFFFFF_t_70 3][]  
          
        https://wimcom.cn  
        ![watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3FxXzMyNTk2NTI3_size_16_color_FFFFFF_t_70 4][]
17. HTTP 自动跳转 HTTPS：
    
    1.  编辑 Nginx 配置文件：
        
            vim /usr/local/nginx/conf/nginx.conf
    2.  在 HTTP 的 server 里增加：
        
            rewrite ^(.*) https://$host$1 permanent;
    3.  测试 Nginx：
        
            /usr/local/nginx/sbin/nginx -t
        
        显示：
        
            nginx: the configuration file /usr/local/nginx/conf/nginx.conf syntax is ok
            nginx: configuration file /usr/local/nginx/conf/nginx.conf test is successful
        
        说明没有问题了。
    4.  重启 Nginx：
        
            systemctl restart nginx.service
    5.  访问 HTTP 自动跳转 HTTPS：  
        http://www.wimcnm.cn  
        http://wimcom.cn

[Installing NGINX Open Source]: https://docs.nginx.com/nginx/admin-guide/installing-nginx/installing-nginx-open-source/
[CentOS 1810 _ Nginx]: https://xuxiaowei.blog.csdn.net/article/details/93340370
[CentOS _ Nginx _ _ _ _]: https://blog.csdn.net/qq_32596527/article/details/88617835
[http_nginx.org]: http://nginx.org/
[http_nginx.org_en_download.html]: http://nginx.org/en/download.html
[watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3FxXzMyNTk2NTI3_size_16_color_FFFFFF_t_70]: /images/20220307/ede39c594fce4dcfaaafaa4f1a080eb9.png
[Link 1]: https://cloud.tencent.com/document/product/400/4143
[https_www.chuyu.me]: https://www.chuyu.me/
[watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3FxXzMyNTk2NTI3_size_16_color_FFFFFF_t_70 1]: /images/20220307/b119ce329b434e7183ee9a8faa93ebb3.png
[watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3FxXzMyNTk2NTI3_size_16_color_FFFFFF_t_70 2]: /images/20220307/477c724324414215a5e6994b6534686a.png
[watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3FxXzMyNTk2NTI3_size_16_color_FFFFFF_t_70 3]: /images/20220307/e497137d541245c7b9a6c4cde62928c6.png
[watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3FxXzMyNTk2NTI3_size_16_color_FFFFFF_t_70 4]: /images/20220307/022cd808e30a496fbe3e363d740525c4.png