ThreadPoolExecutor使用详解

桃扇骨 2022-02-22 15:54 328阅读 0赞

转载于：[https://www.cnblogs.com/zedosu/p/6665306.html][https_www.cnblogs.com_zedosu_p_6665306.html]

***一、概述**   
**1、ThreadPoolExecutor作为java.util.concurrent包对外提供基础实现，以内部线程池的形式对外提供管理任务执行，线程调度，线程池管理等等服务；   
2、Executors方法提供的线程服务，都是通过参数设置来实现不同的线程池机制。   
3、先来了解其线程池管理的机制，有助于正确使用，避免错误使用导致严重故障。同时可以根据自己的需求实现自己的线程池**   
  
**二、核心构造方法讲解**   
**下面是ThreadPoolExecutor最核心的构造方法**   
  
**构造方法参数讲解** *

<table> 
 <tbody> 
  <tr> 
   <td>参数名</td> 
   <td>作用</td> 
  </tr> 
  <tr> 
   <td>corePoolSize</td> 
   <td>核心线程池大小</td> 
  </tr> 
  <tr> 
   <td>maximumPoolSize</td> 
   <td>最大线程池大小</td> 
  </tr> 
  <tr> 
   <td>keepAliveTime</td> 
   <td>线程池中超过corePoolSize数目的空闲线程最大存活时间；可以allowCoreThreadTimeOut(true)使得核心线程有效时间</td> 
  </tr> 
  <tr> 
   <td>TimeUnit</td> 
   <td>keepAliveTime时间单位</td> 
  </tr> 
  <tr> 
   <td>workQueue</td> 
   <td>阻塞任务队列</td> 
  </tr> 
  <tr> 
   <td>threadFactory</td> 
   <td>新建线程工厂</td> 
  </tr> 
  <tr> 
   <td>RejectedExecutionHandler</td> 
   <td>当提交任务数超过maxmumPoolSize+workQueue之和时，任务会交给RejectedExecutionHandler来处理</td> 
  </tr> 
 </tbody> 
</table>

***重点讲解：**   
其中比较容易让人误解的是：corePoolSize，maximumPoolSize，workQueue之间关系。   
  
1.当线程池小于corePoolSize时，新提交任务将创建一个新线程执行任务，即使此时线程池中存在空闲线程。   
2.当线程池达到corePoolSize时，新提交任务将被放入workQueue中，等待线程池中任务调度执行   
3.当workQueue已满，且maximumPoolSize>corePoolSize时，新提交任务会创建新线程执行任务   
4.当提交任务数超过maximumPoolSize时，新提交任务由RejectedExecutionHandler处理   
5.当线程池中超过corePoolSize线程，空闲时间达到keepAliveTime时，关闭空闲线程   
6.当设置allowCoreThreadTimeOut(true)时，线程池中corePoolSize线程空闲时间达到keepAliveTime也将关闭   
  
**线程管理机制图示：**   
![92ad4409-2ab4-388b-9fb1-9fc4e0d832cd.jpg][]  
  
**三、Executors提供的线程池配置方案**   
  
**1、构造一个固定线程数目的线程池，配置的corePoolSize与maximumPoolSize大小相同，同时使用了一个无界LinkedBlockingQueue存放阻塞任务，因此多余的任务将存在再阻塞队列，不会由RejectedExecutionHandler处理** *

public static ExecutorService newFixedThreadPool(int nThreads) {
            return new ThreadPoolExecutor(nThreads, nThreads,
                                          0L, TimeUnit.MILLISECONDS,
                                          new LinkedBlockingQueue<Runnable>());
        }

***2、构造一个缓冲功能的线程池，配置corePoolSize=0，maximumPoolSize=Integer.MAX\_VALUE，keepAliveTime=60s,以及一个无容量的阻塞队列 SynchronousQueue，因此任务提交之后，将会创建新的线程执行；线程空闲超过60s将会销毁** *

public static ExecutorService newCachedThreadPool() {
            return new ThreadPoolExecutor(0, Integer.MAX_VALUE,
                                          60L, TimeUnit.SECONDS,
                                          new SynchronousQueue<Runnable>());
        }

***3、构造一个只支持一个线程的线程池，配置corePoolSize=maximumPoolSize=1，无界阻塞队列LinkedBlockingQueue；保证任务由一个线程串行执行** *

public static ExecutorService newSingleThreadExecutor() {
            return new FinalizableDelegatedExecutorService
                (new ThreadPoolExecutor(1, 1,
                                        0L, TimeUnit.MILLISECONDS,
                                        new LinkedBlockingQueue<Runnable>()));
        }

***4、构造有定时功能的线程池，配置corePoolSize，无界延迟阻塞队列DelayedWorkQueue；有意思的是：maximumPoolSize=Integer.MAX\_VALUE，由于DelayedWorkQueue是无界队列，所以这个值是没有意义的** *

public static ScheduledExecutorService newScheduledThreadPool(int corePoolSize) {
            return new ScheduledThreadPoolExecutor(corePoolSize);
        }
    public static ScheduledExecutorService newScheduledThreadPool(
                int corePoolSize, ThreadFactory threadFactory) {
            return new ScheduledThreadPoolExecutor(corePoolSize, threadFactory);
        }
    public ScheduledThreadPoolExecutor(int corePoolSize,
                                 ThreadFactory threadFactory) {
            super(corePoolSize, Integer.MAX_VALUE, 0, TimeUnit.NANOSECONDS,
                  new DelayedWorkQueue(), threadFactory);
        }

***四、定制属于自己的非阻塞线程池** *

import java.util.concurrent.ArrayBlockingQueue;
    import java.util.concurrent.ExecutorService;
    import java.util.concurrent.RejectedExecutionHandler;
    import java.util.concurrent.ThreadFactory;
    import java.util.concurrent.ThreadPoolExecutor;
    import java.util.concurrent.TimeUnit;
    import java.util.concurrent.atomic.AtomicInteger;
    public class CustomThreadPoolExecutor {
     private ThreadPoolExecutor pool = null; /** * 线程池初始化方法 * * corePoolSize 核心线程池大小----10 * maximumPoolSize 最大线程池大小----30 * keepAliveTime 线程池中超过corePoolSize数目的空闲线程最大存活时间----30+单位TimeUnit * TimeUnit keepAliveTime时间单位----TimeUnit.MINUTES * workQueue 阻塞队列----new ArrayBlockingQueue<Runnable>(10)====10容量的阻塞队列 * threadFactory 新建线程工厂----new CustomThreadFactory()====定制的线程工厂 * rejectedExecutionHandler 当提交任务数超过maxmumPoolSize+workQueue之和时, * 即当提交第41个任务时(前面线程都没有执行完,此测试方法中用sleep(100)), * 任务会交给RejectedExecutionHandler来处理 */ public void init() { pool = new ThreadPoolExecutor( 10, 30, 30, TimeUnit.MINUTES, new ArrayBlockingQueue<Runnable>(10), new CustomThreadFactory(), new CustomRejectedExecutionHandler()); } public void destory() { if(pool != null) { pool.shutdownNow(); } } public ExecutorService getCustomThreadPoolExecutor() { return this.pool; } private class CustomThreadFactory implements ThreadFactory { private AtomicInteger count = new AtomicInteger(0); @Override public Thread newThread(Runnable r) { Thread t = new Thread(r); String threadName = CustomThreadPoolExecutor.class.getSimpleName() + count.addAndGet(1); System.out.println(threadName); t.setName(threadName); return t; } } private class CustomRejectedExecutionHandler implements RejectedExecutionHandler { @Override public void rejectedExecution(Runnable r, ThreadPoolExecutor executor) { // 记录异常 // 报警处理等 System.out.println("error............."); } } // 测试构造的线程池 public static void main(String[] args) { CustomThreadPoolExecutor exec = new CustomThreadPoolExecutor(); // 1.初始化 exec.init(); ExecutorService pool = exec.getCustomThreadPoolExecutor(); for(int i=1; i<100; i++) { System.out.println("提交第" + i + "个任务!"); pool.execute(new Runnable() { @Override public void run() { try { Thread.sleep(3000); } catch (InterruptedException e) { e.printStackTrace(); } System.out.println("running====="); } }); } // 2.销毁----此处不能销毁,因为任务没有提交执行完,如果销毁线程池,任务也就无法执行了 // exec.destory(); try { Thread.sleep(10000); } catch (InterruptedException e) { e.printStackTrace(); } }

\}  
  
***方法中建立一个核心线程数为30个，缓冲队列有10个的线程池。每个线程任务，执行时会先睡眠3秒，保证提交10任务时，线程数目被占用完，再提交30任务时，阻塞队列被占用完，，这样提交第41个任务是，会交给CustomRejectedExecutionHandler 异常处理类来处理。**   
  
**提交任务的代码如下：** *

public void execute(Runnable command) {
            if (command == null)
                throw new NullPointerException();
            /*
             * Proceed in 3 steps:
             *
             * 1. If fewer than corePoolSize threads are running, try to
             * start a new thread with the given command as its first
             * task.  The call to addWorker atomically checks runState and
             * workerCount, and so prevents false alarms that would add
             * threads when it shouldn't, by returning false.
             *
             * 2. If a task can be successfully queued, then we still need
             * to double-check whether we should have added a thread
             * (because existing ones died since last checking) or that
             * the pool shut down since entry into this method. So we
             * recheck state and if necessary roll back the enqueuing if
             * stopped, or start a new thread if there are none.
             *
             * 3. If we cannot queue task, then we try to add a new
             * thread.  If it fails, we know we are shut down or saturated
             * and so reject the task.
             */
            int c = ctl.get();
            if (workerCountOf(c) < corePoolSize) {
                if (addWorker(command, true))
                    return;
                c = ctl.get();
            }
            if (isRunning(c) && workQueue.offer(command)) {
                int recheck = ctl.get();
                if (! isRunning(recheck) && remove(command))
                    reject(command);
                else if (workerCountOf(recheck) == 0)
                    addWorker(null, false);
            }
            else if (!addWorker(command, false))
                reject(command);
        }

***注意：41以后提交的任务就不能正常处理了，因为，execute中提交到任务队列是用的offer方法，如上面代码，这个方法是非阻塞的，所以就会交给CustomRejectedExecutionHandler 来处理，所以对于大数据量的任务来说，这种线程池，如果不设置队列长度会OOM，设置队列长度，会有任务得不到处理，接下来我们构建一个阻塞的自定义线程池**   
  
**五、定制属于自己的阻塞线程池** *

package com.tongbanjie.trade.test.commons;
    import java.util.concurrent.ArrayBlockingQueue;
    import java.util.concurrent.ExecutorService;
    import java.util.concurrent.RejectedExecutionHandler;
    import java.util.concurrent.ThreadFactory;
    import java.util.concurrent.ThreadPoolExecutor;
    import java.util.concurrent.TimeUnit;
    import java.util.concurrent.atomic.AtomicInteger;
    public class CustomThreadPoolExecutor {  
    	  
          
        private ThreadPoolExecutor pool = null;  
          
          
        /** 
         * 线程池初始化方法 
         *  
         * corePoolSize 核心线程池大小----1 
         * maximumPoolSize 最大线程池大小----3 
         * keepAliveTime 线程池中超过corePoolSize数目的空闲线程最大存活时间----30+单位TimeUnit 
         * TimeUnit keepAliveTime时间单位----TimeUnit.MINUTES 
         * workQueue 阻塞队列----new ArrayBlockingQueue<Runnable>(5)====5容量的阻塞队列 
         * threadFactory 新建线程工厂----new CustomThreadFactory()====定制的线程工厂 
         * rejectedExecutionHandler 当提交任务数超过maxmumPoolSize+workQueue之和时, 
         *                          即当提交第41个任务时(前面线程都没有执行完,此测试方法中用sleep(100)), 
         *                                任务会交给RejectedExecutionHandler来处理 
         */  
        public void init() {  
            pool = new ThreadPoolExecutor(  
                    1,  
                    3,  
                    30,  
                    TimeUnit.MINUTES,  
                    new ArrayBlockingQueue<Runnable>(5),  
                    new CustomThreadFactory(),  
                    new CustomRejectedExecutionHandler());  
        }  
      
          
        public void destory() {  
            if(pool != null) {  
                pool.shutdownNow();  
            }  
        }  
          
          
        public ExecutorService getCustomThreadPoolExecutor() {  
            return this.pool;  
        }  
          
        private class CustomThreadFactory implements ThreadFactory {  
      
            private AtomicInteger count = new AtomicInteger(0);  
              
            @Override  
            public Thread newThread(Runnable r) {  
                Thread t = new Thread(r);  
                String threadName = CustomThreadPoolExecutor.class.getSimpleName() + count.addAndGet(1);  
                System.out.println(threadName);  
                t.setName(threadName);  
                return t;  
            }  
        }  
          
          
        private class CustomRejectedExecutionHandler implements RejectedExecutionHandler {  
      
            @Override  
            public void rejectedExecution(Runnable r, ThreadPoolExecutor executor) {  
            	try {
                                    // 核心改造点，由blockingqueue的offer改成put阻塞方法
    				executor.getQueue().put(r);
    			} catch (InterruptedException e) {
    				e.printStackTrace();
    			}
            }  
        }  
          
          
          
        // 测试构造的线程池  
        public static void main(String[] args) {  
        	
            CustomThreadPoolExecutor exec = new CustomThreadPoolExecutor();  
            // 1.初始化  
            exec.init();  
              
            ExecutorService pool = exec.getCustomThreadPoolExecutor();  
            for(int i=1; i<100; i++) {  
                System.out.println("提交第" + i + "个任务!");  
                pool.execute(new Runnable() {  
                    @Override  
                    public void run() {  
                        try {  
                        	System.out.println(">>>task is running====="); 
                            TimeUnit.SECONDS.sleep(10);
                        } catch (InterruptedException e) {  
                            e.printStackTrace();  
                        }  
                    }  
                });  
            }  
              
              
            // 2.销毁----此处不能销毁,因为任务没有提交执行完,如果销毁线程池,任务也就无法执行了  
            // exec.destory();  
              
            try {  
                Thread.sleep(10000);  
            } catch (InterruptedException e) {  
                e.printStackTrace();  
            }  
        }  
    }

***解释：当提交任务被拒绝时，进入拒绝机制，我们实现拒绝方法，把任务重新用阻塞提交方法put提交，实现阻塞提交任务功能，防止队列过大，OOM，提交被拒绝方法在下面**   
  
   *

public void execute(Runnable command) {
            if (command == null)
                throw new NullPointerException();
            int c = ctl.get();
            if (workerCountOf(c) < corePoolSize) {
                if (addWorker(command, true))
                    return;
                c = ctl.get();
            }
            if (isRunning(c) && workQueue.offer(command)) {
                int recheck = ctl.get();
                if (! isRunning(recheck) && remove(command))
                    reject(command);
                else if (workerCountOf(recheck) == 0)
                    addWorker(null, false);
            }
            else if (!addWorker(command, false))
                // 进入拒绝机制， 我们把runnable任务拿出来，重新用阻塞操作put，来实现提交阻塞功能
                reject(command);
        }

***总结：**   
**1、用ThreadPoolExecutor自定义线程池，看线程是的用途，如果任务量不大，可以用无界队列，如果任务量非常大，要用有界队列，防止OOM   
2、如果任务量很大，还要求每个任务都处理成功，要对提交的任务进行阻塞提交，重写拒绝机制，改为阻塞提交。保证不抛弃一个任务   
3、最大线程数一般设为2N+1最好，N是CPU核数   
4、核心线程数，看应用，如果是任务，一天跑一次，设置为0，合适，因为跑完就停掉了，如果是常用线程池，看任务量，是保留一个核心还是几个核心线程数   
5、如果要获取任务执行结果，用CompletionService，但是注意，获取任务的结果的要重新开一个线程获取，如果在主线程获取，就要等任务都提交后才获取，就会阻塞大量任务结果，队列过大OOM，所以最好异步开个线程获取结果***

[https_www.cnblogs.com_zedosu_p_6665306.html]: https://www.cnblogs.com/zedosu/p/6665306.html
[92ad4409-2ab4-388b-9fb1-9fc4e0d832cd.jpg]: /images/20220222/5930fa92e3b448d8b2048391ec0f61a1.png