coco再分组与网络按照分组进行训练

朱雀 2022-02-01 03:19 247阅读 0赞

背景：coco有原始的分组，我们通过谱聚类进行了新的分组。需要对coco进行再分组。然后送入网络训练。

**目录**

一、分组写入文件

1.1 写入参考

1.2 分组结果写入

1.3 分组变量的读出

二、程序中coco分组的运用

2.1 程序调用关系

2.2 聚类分组情况

2.3 更改Config

2.4 重新定义网络

2.5 直接在网络中加载

三、网络结构的定义

3.1 网络输出与标签

3.2 序列按照idx进行重排

3.3  运用index\_select调序

3.4 序列之中的调换

--------------------

# 一、分组写入文件 #

## 1.1 写入参考 ##

可以运用pickle写入文件

参考其他程序中的写入：

correlations = {}
        correlations.update(pp=A_B) #p(A/B)
        correlations.update(fp=notA_B) # P(not A/B)
        correlations.update(pf=A_notB)
        correlations.update(ff=notA_notB)
        with open('sk_spectral_cluster/coco_correlations.pkl', 'wb') as f:
            print("write correlations in sk_spectral_cluster/coco_correlations.pkl")
            pickle.dump(correlations, f)
        with open('sk_spectral_cluster/coco_names.pkl','wb') as name_file:
            print("write correlations in sk_spectral_cluster/coco_names.pkl")
            pickle.dump(names, name_file)

相当于直接将变量用pickle.dump写入文件f之中。

## 1.2 分组结果写入 ##

分组之后，我们的结果写入split\_groups之中，是一个字典。格式为下面注释中的格式。

#---------------store the split result into .pkl file-------
        #  in format dict {   0:  [1, 2, 3, 4, 5, 7, 9, 10, 11, 12]
        #                     1:  [46, 47, 49, 50, 51]
        #                     .........
        #                     2:  [22, 23, 32, 34, 35, 38]   }
    
        with open('sk_spectral_cluster/coco_label_cluster_result.pkl', 'wb') as f:
            print("write cluster result into sk_spectral_cluster/coco_label_cluster_result.pkl")
            pickle.dump(split_groups, f)

命名为 coco\_label\_cluster\_result.pkl

## 1.3 分组变量的读出 ##

直接根据写入路径即可读出：

with open('sk_spectral_cluster/coco_label_cluster_result.pkl', 'rb') as f:
            print("loading sk_spectral_cluster/coco_label_cluster_result.pkl ")
            split_groups= pickle.load(f)
    
        print("split_groups: ",split_groups)

# 二、程序中coco分组的运用 #

## 2.1 程序调用关系 ##

general\_train之中，调用COCO2014进行数据集的读取。

train_dataset = COCO2014(args.data, phase='train', inp_name=Config.INP_NAME, is_grouping=True)  # fixme
        val_dataset = COCO2014(args.data, phase='val', inp_name=Config.INP_NAME, is_grouping=True)  # fixme

其中对组的定义通过config传入函数之中：

GROUPS = 12
        NCLASSES = 80
        NCLASSES_PER_GROUP = [1, 8, 5, 10, 5, 10, 7, 10, 6, 6, 5, 7]  # FIXME: to check
        GROUP_CHANNELS = 512
        CLASS_CHANNELS = 256

直接将分组的参量传入GROUP之中，

if Config.MODEL == 'hgat_fc':
            import mymodels.hgat_fc as hgat_fc
            model = hgat_fc.HGAT_FC(Config.BACKBONE, groups=Config.GROUPS, nclasses=Config.NCLASSES,
                                    nclasses_per_group=Config.NCLASSES_PER_GROUP,
                                    group_channels=Config.GROUP_CHANNELS, class_channels=Config.CLASS_CHANNELS)

## 2.2 聚类分组情况 ##

split groups：

group: 1   group element numbers 10   group_elements :   [1, 2, 3, 4, 5, 7, 9, 10, 11, 12]
    group: 2   group element numbers 5   group_elements :   [46, 47, 49, 50, 51]
    group: 3   group element numbers 6   group_elements :   [22, 23, 32, 34, 35, 38]
    group: 4   group element numbers 4   group_elements :   [16, 18, 19, 29]
    group: 5   group element numbers 5   group_elements :   [6, 24, 25, 26, 28]
    group: 6   group element numbers 7   group_elements :   [15, 57, 59, 65, 73, 74, 77]
    group: 7   group element numbers 4   group_elements :   [61, 71, 78, 79]
    group: 8   group element numbers 7   group_elements :   [39, 58, 68, 69, 70, 72, 75]
    group: 9   group element numbers 10   group_elements :   [0, 8, 13, 14, 17, 20, 21, 33, 36, 37]
    group: 10   group element numbers 5   group_elements :   [62, 63, 64, 66, 67]
    group: 11   group element numbers 10   group_elements :   [40, 41, 42, 43, 44, 45, 53, 55, 56, 60]
    group: 12   group element numbers 2   group_elements :   [30, 31]
    group: 13   group element numbers 2   group_elements :   [48, 52]
    group: 14   group element numbers 2   group_elements :   [27, 54]
    group: 15   group element numbers 1   group_elements :   [76]
    
    Final results,group numbers:  15  max_classes_per_group:  10  probability filter threshold:  0.05
    group: 1   group element numbers:  10
    group_elements :  ['bicycle', 'car', 'motorcycle', 'airplane', 'bus', 'truck', 'traffic light', 'fire hydrant', 'stop sign', 'parking meter']
    group: 2   group element numbers:  5
    group_elements :  ['banana', 'apple', 'orange', 'broccoli', 'carrot']
    group: 3   group element numbers:  6
    group_elements :  ['zebra', 'giraffe', 'sports ball', 'baseball bat', 'baseball glove', 'tennis racket']
    group: 4   group element numbers:  4
    group_elements :  ['dog', 'sheep', 'cow', 'frisbee']
    group: 5   group element numbers:  5
    group_elements :  ['train', 'backpack', 'umbrella', 'handbag', 'suitcase']
    group: 6   group element numbers:  7
    group_elements :  ['cat', 'couch', 'bed', 'remote', 'book', 'clock', 'teddy bear']
    group: 7   group element numbers:  4
    group_elements :  ['toilet', 'sink', 'hair drier', 'toothbrush']
    group: 8   group element numbers:  7
    group_elements :  ['bottle', 'potted plant', 'microwave', 'oven', 'toaster', 'refrigerator', 'vase']
    group: 9   group element numbers:  10
    group_elements :  ['person', 'boat', 'bench', 'bird', 'horse', 'elephant', 'bear', 'kite', 'skateboard', 'surfboard']
    group: 10   group element numbers:  5
    group_elements :  ['tv', 'laptop', 'mouse', 'keyboard', 'cell phone']
    group: 11   group element numbers:  10
    group_elements :  ['wine glass', 'cup', 'fork', 'knife', 'spoon', 'bowl', 'pizza', 'cake', 'chair', 'dining table']
    group: 12   group element numbers:  2
    group_elements :  ['skis', 'snowboard']
    group: 13   group element numbers:  2
    group_elements :  ['sandwich', 'hot dog']
    group: 14   group element numbers:  2
    group_elements :  ['tie', 'donut']
    group: 15   group element numbers:  1
    group_elements :  ['scissors']

## 2.3 更改Config ##

根据分组情况更改相应的程序：

BACKBONE = 'resnet101'
        GROUPS = 15
        NCLASSES = 80
        NCLASSES_PER_GROUP = [10, 5, 6, 4, 5, 7, 4,7,10,5,10,2,2,2,1]  # FIXME: to check

## 2.4 重新定义网络 ##

在网络之中加入结构：

elif Config.MODEL=='clustered_hgat_fc':
            import momydels.clustered_hgat_fc as clustered_hgat_fc
            model=clustered_hgat_fc.HGAT_FC(Config.BACKBONE, groups=Config.GROUPS, nclasses=Config.NCLASSES,
                                    nclasses_per_group=Config.NCLASSES_PER_GROUP,
                                    group_channels=Config.GROUP_CHANNELS, class_channels=Config.CLASS_CHANNELS)

同时在my\_model文件夹之中加入文件

clustered_hgat_fc.py

## 2.5 直接在网络中加载 ##

直接在网络之中加载分组情况，加载完之后，送入网络，便于分组。

#fixme----------- load clustered results
            # load groups and group classes
            with open('sk_spectral_cluster/coco_label_cluster_result.pkl', 'rb') as f:
                print("loading sk_spectral_cluster/coco_label_cluster_result.pkl ")
                split_groups = pickle.load(f)
            for key in split_groups:
                print("group:", key, "  group element numbers", len(split_groups[key]), "  group_elements :  ", split_groups[key])
            print("groups=len(split_groups) :", len(split_groups))
    
            nclasses_per_group = []
            cls_idx_order=[]
            for idx in range(len(split_groups)):
                nclasses_per_group.append(len(split_groups[idx + 1]))
                cls_idx_order=cls_idx_order+split_groups[idx + 1]
    
            torch_cls_idx_order=torch.IntTensor(cls_idx_order)
            self.torch_cls_idx_order=torch_cls_idx_order
            # print("final idx order:",self.torch_cls_idx_order)

# 三、网络结构的定义 #

## 3.1 网络输出与标签 ##

最终输出的为一个n\_classes的变量，对于与每个一标签。

x = torch.cat(outside, dim=1)  # [B,nclasses,C]
            x = torch.cat([self.fcs[i](x[:, i, :]) for i in range(self.nclasses)], dim=1)  # [B,nclasses]
            return x

## 3.2 序列按照idx进行重排 ##

[https://blog.csdn.net/qq\_25037903/article/details/88651166][https_blog.csdn.net_qq_25037903_article_details_88651166]

torch.index\_select

官网地址：[https://pytorch-cn.readthedocs.io/zh/latest/package\_references/torch/\#torchindex\_select][https_pytorch-cn.readthedocs.io_zh_latest_package_references_torch_torchindex_select]

torch.index_select(input, dim, index, out=None) → Tensor

沿着指定维度对输入进行切片，取`index`中指定的相应项(`index`为一个LongTensor)，然后返回到一个新的张量， 返回的张量与原始张量\_Tensor\_有相同的维度(在指定轴上)。

注意： 返回的张量不与原始张量共享内存空间。

参数:

*  input (Tensor) – 输入张量
 *  dim (int) – 索引的轴
 *  index (LongTensor) – 包含索引下标的一维张量
 *  out (Tensor, optional) – 目标张量

理解为，index为目标张量out中的值再原始张量input中的位置。

例如a为![20190513190330651.png][]

idx2为：![20190513190402416.png][]

就是根据idx2中的元素值选出a中的位置的值，存入out之中。

经过

a.index_select(0,idx2)

恢复出来为：![20190513190454555.png][]

## 3.3  运用index\_select调序 ##

下面的x为分组后的组。

outside = []
            for i in range(self.groups):
                inside = []
                for j in range(self.nclasses_per_group[i]):
                    inside.append(self.class_fcs[count](x[:, i, :]))  # [B,C]
                    count += 1
                inside = torch.stack(inside, dim=1)  # [B,N,C]
                inside = self.gat2s[i](inside)  # [B,N,C]
                outside.append(inside)
            x = torch.cat(outside, dim=1)  # [B,nclasses,C]
            x = torch.cat([self.fcs[i](x[:, i, :]) for i in range(self.nclasses)], dim=1)  # [B,nclasses]

恢复到分组前，需要将x调换顺序。

这个self.torch\_cls\_idx\_order为每组在原order的顺序。

torch_cls_idx_order=torch.IntTensor(cls_idx_order)
            self.torch_cls_idx_order=torch_cls_idx_order

我们的目的是：group\_classes在class\_order中的顺序，恢复出原class\_order

cls=x
            for idx in range(0,self.nclasses):
                cls[idx]=x[self.cls_idx_order[idx]]
            x=cls
            index=self.order_cls_idx
            x=x.index_select(0,index)

此法总是报错。暂时不管

## 3.4 序列之中的调换 ##

程序之中改为：

#fixme change order from order in groups to class order
            x = torch.cat([self.fcs[i](x[:, self.idx_in_group_2_cls_idx[i], :]) for i in range(self.nclasses)], dim=1)  # [B,nclasses]

级运用x的顺序，恢复出class的顺序。x为分组后的变量顺序，为了恢复出原始的变量的顺序，我们需要一个对应。

split\_group的对应为，下标idx对应每组输出的位置，值value对应每个类中的类别。

那么我们希望根据每组输出的恢复出每个类的标签。

我们现在，已知每个类别，需要找到在split\_group中对应的下标，所以需要一个value到idx的对应。

idx_in_group_2_cls_idx={}
            for idx in range(len(cls_idx_order)):
                idx_in_group_2_cls_idx[cls_idx_order[idx]]=idx
            print("idx_in_group_2_cls_idx",idx_in_group_2_cls_idx)
            self.idx_in_group_2_cls_idx=idx_in_group_2_cls_idx

[https_blog.csdn.net_qq_25037903_article_details_88651166]: https://blog.csdn.net/qq_25037903/article/details/88651166
[https_pytorch-cn.readthedocs.io_zh_latest_package_references_torch_torchindex_select]: https://pytorch-cn.readthedocs.io/zh/latest/package_references/torch/#torchindex_select
[20190513190330651.png]: /images/20220201/3387bef2f1c047869f075ead600037b2.png
[20190513190402416.png]: /images/20220201/571d9217d6af47a6991a8e228ad67d3a.png
[20190513190454555.png]: /images/20220201/242afed531034931882081c03668956d.png