Quartus 90 for linux 在Ubuntu9.04上安装指南

深碍√TFBOYSˉ_ 2021-11-11 00:28 339阅读 0赞

(1) **Altera** 官方网站上下载quartus9.0 installer  
  
https://www.altera.com/support/software/download/altera\_design/quartus\_sub/dnl-quartus\_sub.jsp  
  
(2)安装tcsh  
－－－－－－－－－－－－－－－  
sudo apt-get install tcsh  
－－－－－－－－－－－－－－－  
  
（3）切换用户权限至root  
－－－－－－－－－－－－－－－  
su root  
－－－－－－－－－－－－－－－  
  
(4)运行下载，安装向导  
－－－－－－－----------------  
bash 90\_altera\_webinstall.sh  
\-----------------------------  
(5)根据安装向导进行下载和安装  
默认安装目录为/opt/altera90/quartus  
(6)导入license,将license放在 **quartus**安装目录下或者调用服务器上的license  
（7）修改环境变量  
修改/etc/下 bash.bashrc文件，将以下内容添加进去。  
－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－  
\#\# Altera Quartus environment variables  
  
QUARTUS\_64BIT=0  
MWOS=linux  
MWARCH=i86  
QUARTUS\_MWWM=allwm  
export LM\_LICENSE\_FILE=<license存放目录>/license.dat  
export QUARTUS\_ROOTDIR=/opt/altera9.0/quartus  
source /opt/altera9.0/nios2eds/env.sh  
export PATH=$PATH:$QUARTUS\_ROOTDIR/bin:$QUESTA\_HOME/questasim/linux  
export PATH=$PATH:$SOPC\_KIT\_NIOS2/bin:$SOPC\_KIT\_NIOS2/bin/nios2-gnutools/H-i686-pc-linux-gnu/bin  
－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－  
  
修改完成之后  
\-------------------------------  
source bash.bashrc  
\------------------------------  
（7）运行quartus  
\------------------------------------------------------  
cd /opt/altera90/quartus  
./quartus  
\------------------------------------------------------

(8)安装usb blaster  
step1:  
  
Tell **Ubuntu** to let normal users use the USB blaster  
  
1) Create a new file at sudo udevadm control --reload-rules  
\------------------------------------------------  
sudo touch /etc/udev/rules.d/51-usbblaster.rules  
sudo gedit /etc/udev/rules.d/51-usbblaster.rules  
\------------------------------------------------  
  
2) Put this in it:  
\---------------------------------------------------------------------------------------------------------------------------------------------------------  
\# Altera USB-Blaster rule to set mode to 666.  
SUBSYSTEM=="usb", ENV\{DEVTYPE\}=="usb\_device", SYSFS\{idVendor\}=="09fb", SYSFS\{idProduct\}=="6001", MODE="0666", NAME="bus/usb/$env\{BUSNUM\}/$env\{DEVNUM\}", RUN+="/bin/chmod 0666 %c"  
\------------------------------------------------------------------------------------------------------------------------------------------------------------  
  
3) Save and close.  
4) Run "sudo udevadm control --reload-rules".  
\---------------------------------------  
sudo udevadm control --reload-rules  
\--------------------------------------  
5)and in your home folder create an empty file named .jtag.conf and plug in the USB Blaster cable  
\-----------------------  
touch /root/.jtag.conf  
\----------------------  
  
  
step2:  
Should the SYMLINK created by udev not be picked up, then you may try this method:  
\--------------------------------------------------  
sudo mount -t usbfs /dev/bus/usb/ /proc/bus/usb/  
killall jtagd  
sudo <quartus install path>/bin/jtagd  
jtagconfig  
\-----------------------------------------------------  
  
step3:  
 Set-up "usbfs" emulation (see Ubuntu bug \#156085 for the history behind this, if you're curious)  
  
1) Open /etc/init.d/mountdevsubfs.sh as root ("sudo gedit /etc/init.d/mountdevsubfs.sh" from a terminal)  
2) Scroll down to the part that reads "domount devpts ..."  
3) Add this after that line:  
\--------------------------------------------------------------------------------------------------------------  
\#  
        \# Magic to make /proc/bus/usb work  
        \#  
        mkdir -p /dev/bus/usb/.usbfs  
        domount usbfs "" /dev/bus/usb/.usbfs usbfs -obusmode=0700,devmode=0600,listmode=0644  
        ln -sf .usbfs/devices /dev/bus/usb/devices  
        mount --rbind /dev/bus/usb /proc/bus/us  
\-------------------------------------------------------------------------------------------------------------  
4) Save and close.  
5) Run "sudo /etc/init.d/mountdevsubfs.sh start"  
  
  
It's now configured! Connect your USB blaster (or remove and reconnect if it's already in) and then launch Quartus. It should now be selectable in Tools -> Programmer -> Hardware Setup.

[/Files/zhangzhi/Qurar.rar][Files_zhangzhi_Qurar.rar]

转载于:https://www.cnblogs.com/zhangzhi/archive/2009/09/19/1569857.html

[Files_zhangzhi_Qurar.rar]: http://files.cnblogs.com/zhangzhi/Qurar.rar