srio 门铃_如何在SkyBell HD门铃上调整运动灵敏度

小灰灰 2021-07-26 12:03 314阅读 0赞

![srio 门铃][srio]

srio 门铃

![IMG\_3328 copy][IMG_3328 copy]

If your SkyBell HD video doorbell is a bit oversensitive and you want to tone it down a bit, here’s how to adjust the motion sensitivity so that you’ll get properly notified whenever someone comes up to your door.

如果您的SkyBell HD视频门铃有点过分敏感，并且您想将其调低一些，请按照以下方法调整运动敏感度，以便在有人上门时得到适当的通知。

The motion sensor on the SkyBell can be a bit unpredictable the first time you set up the unit, depending on where you set it up and what’s in the surrounding area. For instance, if your house is close to the street or sidewalk, you may have to bump down the motion sensitivity so that people just walking by don’t trip the motion sensor.

首次设置本机时，SkyBell上的运动传感器可能会有些变幻，这取决于您在哪里安装以及周围有什么。 例如，如果您的房子靠近街道或人行道，则可能必须降低运动灵敏度，以使刚走过的人不会绊倒运动传感器。

To adjust the motion sensitivity on the SkyBell HD, start off by opening up the SkyBell app.

要在SkyBell HD上调整运动灵敏度，请先打开SkyBell应用程序。

![IMG\_3322\_stomped][IMG_3322_stomped]

Then tap on the settings gear icon in the top-right corner of the screen.

然后点击屏幕右上角的设置齿轮图标。

![IMG\_3321\_stomped][IMG_3321_stomped]

Select “Motion Detection” toward the bottom.

选择底部的“动态检测”。

![IMG\_3330\_stomped][IMG_3330_stomped]

First, if motion detection isn’t turned on in the first place, tap on the toggle switch to the right to enable it.

首先，如果首先没有打开动作检测，请点击右侧的拨动开关将其启用。

![IMG\_3331\_stomped][IMG_3331_stomped]

Below that, you can set the sensitivity for the motion detection, and your three choices are “High”, “Medium”, and “Low”.

在此之下，您可以设置运动检测的灵敏度，您的三个选择是“高”，“中”和“低”。

![IMG\_3332\_stomped][IMG_3332_stomped]

Here’s how these three settings differ:

以下是这三种设置的区别：

*  **High:** Detects someone walking by from up to ten feet away, with little detection when someone walks towards your door.
    
    **高：**检测到有人从十英尺远的地方走过，当有人朝您的门走时几乎看不到。
 *  **Medium:** Detects someone walking by from up to seven feet away, and detects someone walking up to the doorbell from three feet away.
    
    **中：**检测到有人从七英尺远的地方走过，并检测到有人从三英尺远的地方走到门铃。
 *  **Low:** Detects someone walking by from up to five feet away, and detects someone walking up to the doorbell from five feet away.
    
    **低：**检测有人从五英尺远的地方走过，并检测有人从五英尺远的地方走到门铃。

So basically, the lower the sensitivity is on your SkyBell HD, the less it detects people just walking by and more on people actually walking up to your door.

因此，基本上，SkyBell HD的灵敏度越低，它检测到刚走过的人就越少，而实际走到您家门口的人就越多。

Once you select a setting, hit “Save” up in the top-right corner of the screen.

选择设置后，点击屏幕右上角的“保存”。

![IMG\_3332.1\_stomped][IMG_3332.1_stomped]

After you hit save, your new motion sensitivity setting will be active. It may take some time to nail down exactly what you should set your SkyBell to, but once you find a happy medium, you’ll hopefully stop receiving false alerts.

点击保存后，新的运动灵敏度设置将被激活。 确切确定您应该将SkyBell设置为什么可能需要花费一些时间，但是一旦找到满意的媒介，就有望停止接收虚假警报。

> 翻译自: [https://www.howtogeek.com/272890/how-to-adjust-motion-sensitivity-on-the-skybell-hd-doorbell/][https_www.howtogeek.com_272890_how-to-adjust-motion-sensitivity-on-the-skybell-hd-doorbell]

srio 门铃

[srio]: /images/20210726/2ab4937a75514a8eab580cc15444789f.png
[IMG_3328 copy]: /images/20210726/c281485eafcb421e97a8fc917fda4c5a.png
[IMG_3322_stomped]: /images/20210726/5f826576be3e436e82f588eda0ff6250.png
[IMG_3321_stomped]: /images/20210726/2a00233b5b5d4c99a35e8b30e749e984.png
[IMG_3330_stomped]: /images/20210726/3a9867effa5846938877ba91a726dcad.png
[IMG_3331_stomped]: /images/20210726/7e7fd40451c9470db60761c6892ff5be.png
[IMG_3332_stomped]: /images/20210726/a74979e9ee0043259ea3e44607538fba.png
[IMG_3332.1_stomped]: /images/20210726/96e13ed6508746848301486c9d54cdeb.png
[https_www.howtogeek.com_272890_how-to-adjust-motion-sensitivity-on-the-skybell-hd-doorbell]: https://www.howtogeek.com/272890/how-to-adjust-motion-sensitivity-on-the-skybell-hd-doorbell/